What is the best color copier Canon produces?
strictly in terms of two qualifying differentiators.
1. LEAST AMOUNT OF MAINTENANCE AND/OR PROBLEMS.
2. BEST QUALITY
What is the best color copier Canon produces?
strictly in terms of two qualifying differentiators.
1. LEAST AMOUNT OF MAINTENANCE AND/OR PROBLEMS.
2. BEST QUALITY
John , from the current range?
Yes, I am a nerd.
Gaming PC - check. Raspberry Pi - Check. Custom ROM on phone - check. Thick glasses - check.
If possible in the Current "Advance" line and previous 2 generations.
Well, probably the best quality/maintenance ratio is in the Advance C5000-series. In the C5051 it's possible to connect the ColorPASS-GX300, wich improves the quality (only in printing, of course). I don't have any personal experiences with the C7000 or the C9000 -series, but I reckon that they do require lot more maintenance.
But if you can cope with more maintenance than usual copiers, then you should see the imagePRESS C1+
The quality is miles above the Advance -series!
These are my opinions; I hope they help you to decide!
Edit: The best machines from the previous models are absolutely the CLC3200/3220 and the iRC3200/3220. Difference between the CLC and iRC is the embedded Fiery print controller in CLC -model. The ADF ain't so good in those models, but the print engine is good!
Agree with what has been said above. But the question is a little open ended
Yes , the print engine on the CLC3200 is great , but these are a little long in the tooth now. The C1+ is awesome, but expensive and would really need to be on a service contract.
I am a big fan of the IRA9000 series , but again its not a cheap bit of kit and a little bit more labour intensive.
The quality of the IRA5051 is well above what its cost suggests. As long as its the 45/51 speed model and has an external finisher. And yes you can hang a Fiery off the back of those.
Yes, I am a nerd.
Gaming PC - check. Raspberry Pi - Check. Custom ROM on phone - check. Thick glasses - check.
The best copier for you is one wich you know!
Canon CLC3200/3220 are really good machines.Have great quality and are very strong machines,but they can be at a moment the worst copiers all over the world.
The idea is a good copier is a copier you know it and you can fix it.
You can use CLC3200/3220 to print from 50 gsm to 300 gsm,but when you print in two sides with 300 gsm paper,you must have a good fuser,or it shows you some dirty lines.
If you buy a new one,it will be the best copier all over the world!
"Who loves the roses,must also bear thumbs"
I realize this is personal opinion, but thats what matters most to me.
What are your thoughts on the IRC4080i?
I realize this is personal opinion, but thats what matters most to me.
What are your thoughts on the IRC4080i?
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks