Hi, can help please
i got this code refer to fixation motor, can anybody tell me what have to do
trnaks in advance
coco
Thanks: 0
Likes: 0
Dislikes: 0
Hi, can help please
i got this code refer to fixation motor, can anybody tell me what have to do
trnaks in advance
coco
Originally Posted by COCODIAZ
Check Pressure Belt in the Fixing Assembly.
were u working on fixin unit before code ?
imagePRESS C1 E014-0002 from Fixing Assembly.
inspect the Fixing Belt Assembly, check that connector J814 which is located on the Fixing Belt drive Motor M36is seated all the way. This connection does not have to be removed when taking out the Fixing Belt Assembly. When removing the other connectors from the Fixing Driver PCB, the wire harness is pulled and the connector J814 could be dislodged accidentally. Re-seat the connector J814 on M36 Motor Driver to maybe resolve error
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
I inspect the fixing belt assembly, (can send me pics (diagram)of the connectors j814 and M36 motor dirive) ond dont work
help me please
coco
Something is preventing the movement of the fixing motor. When was the last time it was rebuilt?
Picture is shown / use scroll bar below to view full pic
M36.jpg
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
I check the fixing motor and found the cleaning web jam with the fixing roller, can u send me a diagram of the correct postion of the cleaning web
thanks in advance
Last edited by teckat; 09-19-2010 at 04:32 AM.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Nice pictures.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Thanks for the pictures, was very useful.
now i reasembly all ok , but have a code : e0001 - 004, can help me please
Reply With Quote
Bookmarks