Document size

[blu3sky]

ok teckat, i'm just want to shut off auto detect for glass copies.
And your solutions was helping me
Thank you
For MODEL-SZ, I just want to share about the harvey issue

[blu3sky]

ok no problem screwtape

[blu3sky]

in my situation the value of size-det is 0, and the value of op-sz-dt is 0. But the sensor is on.
And I try to change the value of both to 1 then the sensor is off

[teckat]

in my situation the value of size-det is 0, and the value of op-sz-dt is 0. But the sensor is on.
And I try to change the value of both to 1 then the sensor is off

when u change/ both to 0 - u need to turn off & back on printer for it to take effect/

what are u exactly trying to accomplish from glass copies/ that's disturbed you

["Harvey Dent"]

I believe this might help.

Enter service mode:

Level 2/ Copier/ Option/ Body SENS-CNF = 1

SENS-CNF =0 (default) : AB Type Document Sensor Placement
SENS-CNF =1 : Inch Type Document Sensor Placement

At set up or after clearing ram, the value will return to default (0)

Somebody must have cleared Rcon's ram.

Worked like a charm.

Thks.

[SCREWTAPE]

No probs.

Anytime.

[teckat]

Worked like a charm.

Thks.

if someone cleared RCON u better check all your RCON Settings from your Orig. P-Print spec sheets

[blu3sky]

when u change/ both to 0 - u need to turn off & back on printer for it to take effect/

what are u exactly trying to accomplish from glass copies/ that's disturbed you

Yes it must be restart to take effect. I was shut off the sensor document size thank's