Document size

[blu3sky]

hi, i've canon IR5000 and i want to off the sensor document size, which annoying in function image repeat.
please help me

[teckat]

hi, i've canon IR5000 and i want to off the sensor document size, which annoying in function image repeat.
please help me

for Glass copies>
COPIER>OPTION>
SIZE-DET
Use it to turn on/off -the original size detection mechanism.
Settings 0: OFF, 1: ON (default)
Caution -After making the setting, be sure to turn off and then on the main power switch.


COPIER>OPTION>
OP-SZ-DT
Use it to turn on and off -the original size detection mechanism in book
mode.
Settings 0: OFF (accepts input of original size from control panel; default)
1: ON (detects original size automatically)


for ADF>
COPIER>OPTION>
SCANSLCT
Use it to turn on/off- the ADF original size detection mechanism.
• When ON, the scan size is determined according to the detected original
size.
Settings 0: OFF (default), 1: ON

["Harvey Dent"]

Will this help for a related problem I've come across. I have a problem when I put copy on glass it reads 11x17 but the paper is letter.

[SCREWTAPE]

Will this help for a related problem I've come across. I have a problem when I put copy on glass it reads 11x17 but the paper is letter.

I believe this might help.

Enter service mode:

Level 2/ Copier/ Option/ Body SENS-CNF = 1

SENS-CNF =0 (default) : AB Type Document Sensor Placement
SENS-CNF =1 : Inch Type Document Sensor Placement

At set up or after clearing ram, the value will return to default (0)

Somebody must have cleared Rcon's ram.

["Harvey Dent"]

Thanks screwtape. Once again your fast response is appreciated. I will check this out.

[SCREWTAPE]

No problem.

Anytime.

[blu3sky]

thank you teckat
, but at my copier 1 for off

[blu3sky]

I believe this might help.

Enter service mode:

Level 2/ Copier/ Option/ Body SENS-CNF = 1

SENS-CNF =0 (default) : AB Type Document Sensor Placement
SENS-CNF =1 : Inch Type Document Sensor Placement

At set up or after clearing ram, the value will return to default (0)

Somebody must have cleared Rcon's ram.

if that topic, at my copier there isn't sens-cnf but model-sz it the same with sens-cnf

[teckat]

thank you teckat
, but at my copier 1 for off

the settings I posted for you are for your situation that u posted for/ u wanted to turn off Auto sensor Reads for Glass copies/ I also included a turnoff for ADF auto read/

u requested an adjustment for "AUTO DETECT TO BE SHUT OFF"

hi, i've canon IR5000 and i want to off the sensor document size, which annoying in function image repeat.

please help me}

When u turn off Auto Detect / for Glass and u put a document with a size other than those loaded in paper trays =u will be prompted to select the tray to print from.

If Auto Detect is turned off for ADF/ When u put a Document in tray> after pick up and read, if Document is different size than paper loaded/ u will be prompted to choose what size paper to copy on.

This is what SCREWTAPE's post was about

iR5000/6000
COPIER>OPTION

MODEL-SZ
Use it to switch default ratios display and ADF original size detection by
site.
Settings 0: AB (6R5E), 1: INCH (5R4E), 2: A (3R3E), 3: AB/INCH (6R5E)

that setting displays paper tray sizes available / if u turn off Auto Detect for Glass or ADF>Read Above messages

[SCREWTAPE]

if that topic, at my copier there isn't sens-cnf but model-sz it the same with sens-cnf

Teckat has given you direction that is base for your issue.

Harvey has a different issue. Sorry for the confusion.