hi, i've canon IR5000 and i want to off the sensor document size, which annoying in function image repeat.
please help me
hi, i've canon IR5000 and i want to off the sensor document size, which annoying in function image repeat.
please help me
for Glass copies>
COPIER>OPTION>
SIZE-DET
Use it to turn on/off -the original size detection mechanism.
Settings 0: OFF, 1: ON (default)
Caution -After making the setting, be sure to turn off and then on the main power switch.
COPIER>OPTION>
OP-SZ-DT
Use it to turn on and off -the original size detection mechanism in book
mode.
Settings 0: OFF (accepts input of original size from control panel; default)
1: ON (detects original size automatically)
for ADF>
COPIER>OPTION>
SCANSLCT
Use it to turn on/off- the ADF original size detection mechanism.
• When ON, the scan size is determined according to the detected original
size.
Settings 0: OFF (default), 1: ON
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Will this help for a related problem I've come across. I have a problem when I put copy on glass it reads 11x17 but the paper is letter.
I believe this might help.
Enter service mode:
Level 2/ Copier/ Option/ Body SENS-CNF = 1
SENS-CNF =0 (default) : AB Type Document Sensor Placement
SENS-CNF =1 : Inch Type Document Sensor Placement
At set up or after clearing ram, the value will return to default (0)
Somebody must have cleared Rcon's ram.
Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC
Thanks screwtape. Once again your fast response is appreciated. I will check this out.
No problem.
Anytime.
Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC
thank you teckat
, but at my copier 1 for off
Last edited by blu3sky; 09-18-2010 at 08:09 AM.
the settings I posted for you are for your situation that u posted for/ u wanted to turn off Auto sensor Reads for Glass copies/ I also included a turnoff for ADF auto read/
u requested an adjustment for "AUTO DETECT TO BE SHUT OFF"
hi, i've canon IR5000 and i want to off the sensor document size, which annoying in function image repeat.
please help me}
When u turn off Auto Detect / for Glass and u put a document with a size other than those loaded in paper trays =u will be prompted to select the tray to print from.
If Auto Detect is turned off for ADF/ When u put a Document in tray> after pick up and read, if Document is different size than paper loaded/ u will be prompted to choose what size paper to copy on.
This is what SCREWTAPE's post was about
iR5000/6000
COPIER>OPTION
MODEL-SZ
Use it to switch default ratios display and ADF original size detection by
site.
Settings 0: AB (6R5E), 1: INCH (5R4E), 2: A (3R3E), 3: AB/INCH (6R5E)
that setting displays paper tray sizes available / if u turn off Auto Detect for Glass or ADF>Read Above messages
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC
Bookmarks