C3220 Bypass Paper Detect

[Brian8506]

I just did an hour ago. Thanks for the help. Cst under function did it.

[SCREWTAPE]

OK..

Thanks for posting back.

[Desert Rat]

Brian8506 & Screwtape,
Thanks for this post and solution. I am getting the same message on an IRA4225. As I read your posts,
I referenced the svc manual and found my solution also.
Reading on, the book also sez this information can be found on the svc label of adjustments. This may be
an easier way of getting it back to seeing the size.
Also when I was working on this in the shop I found a place in the svc mode that would display the guide
board output in terms of mm. But now I can't remember where it was. Probably under the "Display" icon
I would guess.

Thanks for sharing,

DR