Thanks: 0
Likes: 0
Dislikes: 0
The USB Interface Board can be used only if the optional Color Network Multi-PDLOriginally Posted by bojanbelgrade
Printer Kit is installed, or if the Super G3 FAX Board and Resolution Switching Board are
installed.
• To connect your computer and the machine with a USB cable, you must install a USB
Interface Board with a Color Network Multi-PDL Printer Kit to use the printer functions,
You cannot use the Network Scan function from the computer connected to the machine
through a USB connection.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Of course I knowYou cannot use the Network Scan function from the computer connected to the machine
through a USB connection.
I did not knowyou must install a USB
Interface Board with a Color Network Multi-PDL Printer Kit
but we did not understand why is the rear entrance USB if not in use or why there is input USB if not in use.
all in all i contact my dealer for buy a Printer Kit
Of course I know
I did not know
but we did not understand why is the rear entrance USB if not in use or why there is input USB if not in use.
all in all i contact my dealer for buy a Printer Kit
The UFR Pcb.Board is included in the Colour Network Printer Unit-D1
Did u open back of printer to see if USB IFPCB is installed properly/ u still need the Color Network Multi-PDL Printer Kit in stalled for it to function
iR.jpg
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
J1104 USB or token ring board: YES inserted in the slot
J1106 Network Interface Card:Yes inserted in the slot
Now nothing I do not understand what is happening
Ok man i call my dealer to repair and conection IR6800c to my notebook.
something is wrong here J1104 USB or token ring board inserted in the slot and J1106 Network Interface Card inserted in the slot but not work.
Ir5050 (UTP-TCP/IP and USB connect) work fine
Ir6800c (UTP-TCP/IP and USB connect) not work
J1104 USB or token ring board: YES inserted in the slot
J1106 Network Interface Card:Yes inserted in the slot
Now nothing I do not understand what is happening
Ok man i call my dealer to repair and conection IR6800c to my notebook.
something is wrong here J1104 USB or token ring board inserted in the slot and J1106 Network Interface Card inserted in the slot but not work.
Ir5050 (UTP-TCP/IP and USB connect) work fine
Ir6800c (UTP-TCP/IP and USB connect) not work
YOU NEED THE UFR Pcb installed in J1105 (it is in the Printer kit D1) for USB Functions
READ BELOW>>>>
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
J1104 USB or token ring board: YES inserted in the slot
J1105 UFR OR OPEN I/F BOARD - inserted in the slot man YES
J1106 Network Interface Card:Yes inserted in the slot
ok look J1106 Network Interface Card inserted in the slot why is not connect for netwrok card? or tell me link to download USB class driver for xp sp3 32bit pro and i testing machine now.
I still think that the incorrect machine
i connect usb to notebook turn on machine and how to recognize new hardware Canon IR6800c my OS XP Pro if not all the cards? ok how? tell me??
I am not a genius but wash to install ordinary drivers for any printer or any models over USB port.
All drivers from list http://software.canon-europe.com/products/0010039.asp i testing and not work for model Canon IR6800c
All drivers from list http://software.canon-europe.com/products/0010056.asp i testing and not work for model Canon IR6800c ,,,and if it is not my model but I tried.. this is for model Canon IR6800c-d1 and not work.
Not work in network not work USB port connection, not work any.
Model Canon IR5050 work all manual or connecting for PC, model 6800c work manual but connect for pc nothing.
I still think that the incorrect machine and i call my dealer in monday 7.00PM a and break the machine of his head.
Model: UFR Rendering Board (SURF Board): UFR Printing Support? imageRUNNER C3200/C3220/C2620 SURF board included with Color Printer Kit A1/A2. Only with Color Printer Kit A1/A2 installed. imageRUNNER C3100 SURF board is standard. Standard. imageRUNNER C3100N SURF board is standard. Standard. imageRUNNER C5800/C6800 SURF board included with Color Printer Kit C1 Only with Color Printer Kit C1 installed.
* This Rendering board (SURF board) is REQUIRED to print via UFR.
Models supported: imageRUNNER C2620 / C3200 / C3220, imageRUNNER C3100 / C3100N, and imageRUNNER C5800 / C6800.
imageRUNNER C5800/C6800 SURF board included with Color Printer Kit C1 Only with Color Printer Kit C1 installed.
* Note - UFR printing is NOT supported with the imagePASS or ColorPASS controllers.
The Open Interface Board (used for the imagePASS controller's connection to the copier) gets installed in the slot where the SURF board belongs. The SURF board must be removed from the copier to install the imagePASS controller.
* UFRII printing is not available when a Fiery controller (ex. imagePASS, ColorPASS, imagePRESS Server) is connected to the Canon device.
.
UFRII Print Drivers for the supported Operating Systems are available for download on the e-support site in the Download Center.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
NIC Card is for your Network connection
An IF Pcb (J1105) is for a connection to an external imagePass Fiery Server
Th UFR pcb.(J1105)is used when u do not have a Fiery Connected
so u must have the UFR Pcb in that slot J1105
OK ! so that means u do have the Color Printer Kit C1 installed
u now need to Check in service mode to see see if your Copier > Option > Int-Face > IMG-CONT is set to "0"
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
tomorrow comes the dealer to look at the machine and bring what he did.
Thanks all
Reply With Quote
Bookmarks