Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC
New problem, my Canon IR6800C with driver Canon PCL5e/5c Printer Driver v8.70,,operate normally until today, to announce a new problem,I go to press a file(pdf,doc any) select print --machine is started and works for 2 seconds and stops,, as if not to retract the paper,on manual touchscreen control for all normal work but over notebook(WinXP Pro 32bit) USB connection will not work more,I unistalled and installed the driver again and again but the same problem,no error occurs not only will not work.If anyone knows what could be a problem? I restore my Windows to restore point but nothing,,what to do?
Thanks
Looks like printing PCL to a printer that only supports UFR.
So how was working normally with the PCL driver to yesterday and suddenly stopped working, it's not clear to me ???? something is wrong with this machine definitely
But seriously now, this machine was designed as a workgroup printer and almost always connected throught the network. I don;t think there are much people with experience on 6800 USB.
U could try to read out the print log, using the status button in right lower corner of display. See if u can see the error code (NG code) of the printjob.
Bookmarks