Thanks Thanks:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Trusted Tech 50+ Posts tariq65's Avatar
    Join Date
    Jun 2010
    Location
    Lahore
    Posts
    84
    Rep Power
    0

    Exclamation canon ir-2016 showing download standby

    i am facing this problem canon ir-2016 display showing download standby not work all keys.erroe red light glowing
    ani body help me thanks.

    Last edited by tariq65; 09-28-2010 at 04:25 PM. Reason: detal

  2. #2
    Service Manager 10,000+ Posts
    canon ir-2016 showing download standby

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,155
    Rep Power
    213
    Quote Originally Posted by tariq65 View Post
    i am facing this problem canon ir-2016 display showing download standby not work all keys.erroe red light glowing
    ani body help me thanks.
    did u just install a Printer Kit ??

    The Display will show "Download Mode" or "Download Standby" even though the imageRUNNER was not put into download mode. This may also occur after installing the updated Printer Kit-J1 [0446B005AA]. Turning the power on and off will not reset the message.

    flashing the machine to the latest system software may resolve the unusual message.

    Note: Printer Kit-J1 [0446B005AA] requires the new system software v60.02 be installed on the imageRUNNER.


    or re-flash the BOOT ROM with at least version 60.02.






    Installing System Software on the imageRUNNER 2020 / 2016 Series

    iR2016_2020.pdf






    The following modules must be installed from a PC connected to the copier via a USB cable using the Service Support Tool:

    - System (main controller) *
    - Boot (boot program)
    - PCL (PCL printer kit -J1)

    * The main controller also controls the reader.

    To flash the Finisher -U1 (Fin_U1), you must connect the PC to the finisher via a RS232C straight cable and the Downloader PCB (FY9-2034) using the Service Support Tool.

    Due to copyright restrictions, the 2020/2016 System Software is not available for electronic download. Please order this 2020/2016 system software as a service part using Part Number FY9-4240-003.

    To enter Download Mode on the imageRUNNER 2020 / 2016 Series:

    1. Hit Additional Functions, 2, 8, and Additional Functions to enter Service Mode.
    2. Press the + or - key to scroll through the Service Mode options.
    3. Scroll to '#DOWNLOAD'.
    4. Hit the OK key.

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Trusted Tech 50+ Posts android790's Avatar
    Join Date
    Jul 2010
    Posts
    63
    Rep Power
    15
    I had this happen to me for no real reason. The flash fixed it. You should follow what teckat posted. Save yourself time and money.

    Yes, I am here to fix your machine. No, your machine went out of warranty 18 years ago.

  4. #4
    Trusted Tech 50+ Posts tariq65's Avatar
    Join Date
    Jun 2010
    Location
    Lahore
    Posts
    84
    Rep Power
    0
    thak so mutch sir.


  5. #5
    Junior Member
    Join Date
    May 2012
    Posts
    8
    Rep Power
    0

    Re: canon ir-2016 showing download standby

    Quote Originally Posted by teckat View Post
    did u just install a Printer Kit ??

    The Display will show "Download Mode" or "Download Standby" even though the imageRUNNER was not put into download mode. This may also occur after installing the updated Printer Kit-J1 [0446B005AA]. Turning the power on and off will not reset the message.

    flashing the machine to the latest system software may resolve the unusual message.

    Note: Printer Kit-J1 [0446B005AA] requires the new system software v60.02 be installed on the imageRUNNER.


    or re-flash the BOOT ROM with at least version 60.02.






    Installing System Software on the imageRUNNER 2020 / 2016 Series

    iR2016_2020.pdf






    The following modules must be installed from a PC connected to the copier via a USB cable using the Service Support Tool:

    - System (main controller) *
    - Boot (boot program)
    - PCL (PCL printer kit -J1)

    * The main controller also controls the reader.

    To flash the Finisher -U1 (Fin_U1), you must connect the PC to the finisher via a RS232C straight cable and the Downloader PCB (FY9-2034) using the Service Support Tool.

    Due to copyright restrictions, the 2020/2016 System Software is not available for electronic download. Please order this 2020/2016 system software as a service part using Part Number FY9-4240-003.

    To enter Download Mode on the imageRUNNER 2020 / 2016 Series:

    1. Hit Additional Functions, 2, 8, and Additional Functions to enter Service Mode.
    2. Press the + or - key to scroll through the Service Mode options.
    3. Scroll to '#DOWNLOAD'.
    4. Hit the OK key.
    Iis it necessary to flash the finsher, i mean will it work if didnt flash it. by only downloading:

    -System (main controller)
    - Boot (boot program)
    - PCL (PCL printer kit -J1)


  6. #6
    Service Manager 10,000+ Posts
    canon ir-2016 showing download standby

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,155
    Rep Power
    213

    Thumbs up Re: canon ir-2016 showing download standby

    no/ not unless u have an issue with it/ or the firmware is old


    READ THIS PDF>>important info on Firmware-iR2016 Firmware_TP11_141.pdf

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  7. #7
    Junior Member
    Join Date
    May 2012
    Posts
    8
    Rep Power
    0

    Re: canon ir-2016 showing download standby

    Quote Originally Posted by teckat View Post
    no/ not unless u have an issue with it/ or the firmware is old


    READ THIS PDF>>important info on Firmware-iR2016 Firmware_TP11_141.pdf
    thnax alot. i have some questions about the following paragraph taken fro the pdf that u gave me.

    :PROCEDURE:
    Points to note when upgrading from ver. 10 or earlier to ver. 60 or later:
    When upgrading from a previous version to v60.02, an “ALL Clear” will need to be performed. In order to
    back up the required data files, System Software v15.99 for the imageRUNNER 2016/ 2020 or v10.99 for
    the imageRUNNER 2016i/ 2020i will need to be installed first. When “ALL Clear” is performed after
    System Software v15.99 for the imageRUNNER 2016/ 2020 and v10.99 for the imageRUNNER 2016i/
    2020i has been installed, the following user information is deleted, so back up of all data is required
    beforehand.
    - Address Book
    - User Data:

    q1 is what is the "ALL CLEAR" , AND HOW TO DO IT Manually. q2 how can i know the firmware version of Machine if its always on download standby. thnx alot again u have been great help for me.


  8. #8
    Service Manager 10,000+ Posts
    canon ir-2016 showing download standby

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,155
    Rep Power
    213

    Re: canon ir-2016 showing download standby

    try to enter service mode> even though download message is present--

    Use it to clear all settings/registration data except the counter (denominator, numerator)

    To perform an 'ALL CLEAR', enter service mode by pressing additional functions > 2 then 8 and additional functions again. Scroll to #Clear and press ok. Next,select ALL and press ok. The imageRUNNER may power cycle itself.

    Note*
    After performing the ALL CLEAR, the imageRUNNER will be set to factory default and user inputted values will be lost.

    Firmware ver= don't u have a Spec Report ??
    To print a Spec Report from the imageRUNNER 2016 / 2016i / 2020 / 2020i:

    1. Enter Service Mode by hitting Additional Functions > 2 > 8 > Additional Functions.

    2. The Service Mode screen appears displaying [#SSSW].

    3. Hit the Left Arrow 6 times. [REPORT] is displayed. Press OK.

    4. Press the Right Arrow 1 time. [REPORT OUTPUT] is displayed. Press OK.

    5. Hit the Right Arrow 5 times. [SPEC LIST] is displayed. Press OK.

    6. The Spec Report is printed out.


    u may be able to check in RUI

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  9. #9
    Junior Member
    Join Date
    Dec 2012
    Posts
    3
    Rep Power
    0

    Re: canon ir-2016 showing download standby

    Quote Originally Posted by teckat View Post
    try to enter service mode> even though download message is present--

    Use it to clear all settings/registration data except the counter (denominator, numerator)

    To perform an 'ALL CLEAR', enter service mode by pressing additional functions > 2 then 8 and additional functions again. Scroll to #Clear and press ok. Next,select ALL and press ok. The imageRUNNER may power cycle itself.

    Note*
    After performing the ALL CLEAR, the imageRUNNER will be set to factory default and user inputted values will be lost.

    Firmware ver= don't u have a Spec Report ??
    To print a Spec Report from the imageRUNNER 2016 / 2016i / 2020 / 2020i:

    1. Enter Service Mode by hitting Additional Functions > 2 > 8 > Additional Functions.

    2. The Service Mode screen appears displaying [#SSSW].

    3. Hit the Left Arrow 6 times. [REPORT] is displayed. Press OK.

    4. Press the Right Arrow 1 time. [REPORT OUTPUT] is displayed. Press OK.

    5. Hit the Right Arrow 5 times. [SPEC LIST] is displayed. Press OK.

    6. The Spec Report is printed out.


    u may be able to check in RUI
    Hi teckat,

    I've just stumbled upon your posts here, but am wondering if it would be possible to flash my iR2016 using a Mac. (I haven't installed anything new at all, but don't have access to a Windows PC.)

    Many thanks in advance for any and all advice!


  10. #10
    Senior Tech 250+ Posts spectraindo's Avatar
    Join Date
    May 2008
    Location
    Surabaya, East Java
    Posts
    295
    Rep Power
    22

    Re: canon ir-2016 showing download standby

    Unfortunately the Canon SST work only on a Windows PC, there is no Mac version.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here