Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14
  1. #11
    Service Manager 10,000+ Posts
    Reset counter IR3300

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by Randy G View Post
    Could be? to reset counter? sounds like good.


    Stupidity Doing Same Thing Over Button (0681).jpg

    case-closed-stamp.JPG
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  2. #12
    East Coast Imaging 2,500+ Posts
    Reset counter IR3300

    SCREWTAPE's Avatar
    Join Date
    Jan 2009
    Location
    New York City
    Posts
    3,399
    Rep Power
    69
    Stupid is , stupid does.
    Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC

  3. #13
    sqrt
    Guest

    Lightbulb Re: Reset counter IR3300

    1.program counter and serial

    or

    2.remove battery and ( ! C1008 = 0V ) Replace
    2.1 counter
    2.2 battery 3.3v

  4. #14
    Service Manager 10,000+ Posts
    Reset counter IR3300

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Reset counter IR3300

    Quote Originally Posted by sqrt View Post
    1.program counter and serial

    or

    2.remove battery and ( ! C1008 = 0V ) Replace
    2.1 counter
    2.2 battery 3.3v
    ----------------------------------------------------------------------------------------

    first off/ this post is from 10-03-2010


    second/u don't know what you're talking about

    The counters are controlled by the main controller PCB


    TOTAL COUNTER IS FIXED=NO
    The type of soft counter 1 cannot be changed.
    101: total 1 (default: fixed to 101)

    Total Machine counters are not to be played with
    COPIER>FUNCTION>CLEAR
    CNT-MCON
    Use it to clear the soft counters for servicing on the main controller PCB.
    Using the Mode
    1) Select <CNT-MCON> to highlight, and press the OK key.
    2) Turn off and then on the main power switch.

    CNT-DCON
    Use it to clear the soft counter for servicing on the DC controller PCB.
    Using the Mode
    1) Select <CNT-DCON> to highlight, and press the OK key.
    2) Turn off and then on the main power switch.

    Durables COUNTER can be cleared
    =yes



    ---------------------------------------------------------

    the Counter Memory, Serial Number and Main Controller PCBs,

    work as a set and are considered the “Soft Counter Circuit”. The Counter Memory PCB is
    electronically stamped with the serial number from the Serial Number PCB. Neither the Counter Memory
    PCB nor the Serial Number PCB can be swapped to other equipment. The Counter Memory PCB keeps track
    of the total count, which cannot be erased or changed.
    The service counters are retained by the Main
    Controller. These counters can be reset manually through service mode. When the Counter Memory PCB
    must be replaced, after installing the new one, the new Counter Memory PCB learns the Total Count from the
    Main Controller. This is retained in SRAM on the Main Controller PCB and held active by means of an on
    board battery.


    Never replace two boards in the Soft Counter circuit at the same time! This would include any
    two of either the Counter Memory PCB, Main Controller PCB (or Image Processor depending on
    model) and Serial Number PCB

    It is illegal to tamper with this circuit in an attempt to falsify the counter readings of any Canon
    Copier.


    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here