Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    arlf
    Guest

    Reset counter IR3300

    Pls help me ,

    I want reset counter IR3300

    Thx for help me

  2. #2
    Service Manager 10,000+ Posts
    Reset counter IR3300

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by arlf View Post
    Pls help me ,

    I want reset counter IR3300

    Thx for help me

    The counters are controlled by the main controller PCB

    TOTAL COUNTER IS FIXED=NO
    The type of soft counter 1 cannot be changed.
    101: total 1 (default: fixed to 101)

    Total Machine counters are not to be played with
    COPIER>FUNCTION>CLEAR
    CNT-MCON
    Use it to clear the soft counters for servicing on the main controller PCB.
    Using the Mode
    1) Select <CNT-MCON> to highlight, and press the OK key.
    2) Turn off and then on the main power switch.

    CNT-DCON
    Use it to clear the soft counter for servicing on the DC controller PCB.
    Using the Mode
    1) Select <CNT-DCON> to highlight, and press the OK key.
    2) Turn off and then on the main power switch.

    Durables COUNTER can be cleared
    =yes
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Service Manager 10,000+ Posts
    Reset counter IR3300

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    the Counter Memory, Serial Number and Main Controller PCBs,

    work as a set and are considered the “Soft Counter Circuit”. The Counter Memory PCB is
    electronically stamped with the serial number from the Serial Number PCB. Neither the Counter Memory
    PCB nor the Serial Number PCB can be swapped to other equipment. The Counter Memory PCB keeps track
    of the total count, which cannot be erased or changed.
    The service counters are retained by the Main
    Controller. These counters can be reset manually through service mode. When the Counter Memory PCB
    must be replaced, after installing the new one, the new Counter Memory PCB learns the Total Count from the
    Main Controller. This is retained in SRAM on the Main Controller PCB and held active by means of an on
    board battery.


    Never replace two boards in the Soft Counter circuit at the same time! This would include any
    two of either the Counter Memory PCB, Main Controller PCB (or Image Processor depending on
    model) and Serial Number PCB

    It is illegal to tamper with this circuit in an attempt to falsify the counter readings of any Canon
    Copier.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  4. #4
    East Coast Imaging 2,500+ Posts
    Reset counter IR3300

    SCREWTAPE's Avatar
    Join Date
    Jan 2009
    Location
    New York City
    Posts
    3,399
    Rep Power
    69
    That's a no nooooo..

    That's FRAUD.
    Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC

  5. #5
    teacher-guide-expert-guru 2,500+ Posts
    Reset counter IR3300

    zoraldinho's Avatar
    Join Date
    Mar 2008
    Location
    SVN
    Posts
    4,943
    Rep Power
    106
    Quote Originally Posted by arlf View Post
    Pls help me ,

    I want reset counter IR3300

    Thx for help me

    Your 2 post is reset counter.This is copytechnet not garagedealernet.


    tech11.jpg

  6. #6
    Major Asshole! 2,500+ Posts
    Reset counter IR3300

    mrwho's Avatar
    Join Date
    Apr 2009
    Location
    Combing the desert!
    Posts
    4,293
    Rep Power
    86
    Quote Originally Posted by arlf View Post
    Pls help me ,

    I want reset counter IR3300

    Thx for help me
    I wrote a detailed procedure for that over here. Be sure to follow it thoroughly.
    ' "But the salesman said . . ." The salesman's an asshole!'
    Mascan42

    'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'

    Ibid

    I'm just an ex-tech lurking around and spreading disinformation!

  7. #7
    teacher-guide-expert-guru 2,500+ Posts
    Reset counter IR3300

    zoraldinho's Avatar
    Join Date
    Mar 2008
    Location
    SVN
    Posts
    4,943
    Rep Power
    106
    Ha ha ha.I almost piss.

  8. #8
    Service Manager 10,000+ Posts
    Reset counter IR3300

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    soft counters can be cleared/ except for Total 101
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  9. #9
    Tech Specialist 1,000+ Posts Canuck's Avatar
    Join Date
    Nov 2007
    Location
    Southwestern Ontario
    Posts
    1,713
    Rep Power
    63
    Quote Originally Posted by arlf View Post
    Pls help me ,

    I want reset counter IR3300

    Thx for help me
    replace these components:all circuit boards,pick up assemblies,dev,drum unit,reader assembly,adf,laser,fuser assembly,machine frame,all wiring,sensors,connectors....

  10. #10
    Randy G
    Guest
    Could be? to reset counter? sounds like good.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here