making-money1-1024x902.jpg
Easy ! Just Print your own money/when u are a little short
Thanks: 0
Likes: 0
Dislikes: 0
making-money1-1024x902.jpg
Easy ! Just Print your own money/when u are a little short
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Originally Posted by teckat
...hehehe...In my country you can go to jail for doing that...GOTCHA...
...like i said "for best result".At 100k, print/copy tend to fade. I don't wait till my customer call to complaint when I've notice the issue a day before or so....time is precious & time is also $$$. Afterall the cost is low. 5x lower then the original drum.
IR3300 developer assy lifespan = 480k>500k
Should be replace if you intend to use it longer.
IR3300 machine lifespan = 5 millions
Get it overhaul if you intend to use it longer.
When you install the new drum don't forget to do the adjustment in service mode or it won't go it's full life expectancy and will fail early. Very important with this model.
Failure to follow the above steps will decrease the drum life.
- Start Service mode. * / 2&8 / *.
- Go to "COPIER>FUNCTION>DPC>D-GAMMA".
- Press the OK key. The machine will pick-up paper from cassette 2. Paper size does not matter. The machine ends APVC correction by delivering a blank sheet.
- Press the reset key twice to end service mode.
Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com
I didn't know that, thanks for the tip.
Drums which I install last really long without any adjustments.
COPIER>FUNCTION>DPC>D-GAMMA
Can I use this trick with iR 2016?
Glad to help. If you haven't had diminished drum life without doing that adjustment...youv'e been very lucky.
No,, nothing in service mode to run that function. The iR2016 is a fax machine that dreams of being a copier someday when it grows up....
HA HA HA HA..
Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC
Reply With Quote
Bookmarks