Will removing the pretransfer unit cause the machine to pop a code?
Kelly
Will removing the pretransfer unit cause the machine to pop a code?
Kelly
what code ?
akinator_1_defi.jpg
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
An error code. Will an ERROR CODE pop up because we remove the pre-transfer assembly?
Not sure if this will help but just recently had an IR 600 with some quality issues and moved it to a new room that no longer had commercial carpet and had a fully dedicated 20 amp outlet on it's own breaker...it prints perfectly EVERY time now...ain't that some sh*t.
A good reason to remove the pretrans is to see if that's what's causing the problem, you either got to do some troubleshooting or just scratch yer ass and wonder what it could be.
Cheat the door, let it warm up and remove the corona, what's the worst that could happen?
Either it wraps on the drum or it don't.
I have had this happen on ir 550 and ir 600s The problem is the fan in the transport is turning to slow and won't help pull the paper down to the transport belts. Your sep corona will pull the paper down but you still need the fan at full speed to keep letter size from not hitting the drum claws. good luck
I know all about troubleshooting procedures/ Poster replaced all the coronas /
if paper arch's with old and new corona= it is a machine end block issue (short)/ or a transport bed issue / or a frame grounding issue / or HVT - take your pick !
it is all about process of elimination
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
I missed that part that he replaced the corona assemblies, I thought he just restrung them, sorry about that.
Yeah, at this point it's probably just trial and error. If the bed fan is working, I'm thinking HVT would be next.
Bookmarks