C3200 - frozen display

[kuby]

I started up a irC3200 today that it looks like everything is booting up OK. Start ImagePass, start copier. Display goes through normal screens, then when it gets to the final screen it keeps saying warming up - the screen is frozen. You press tabs and nothing happens, you open a door and it keeps running. I think maybe I need to reflash the HD. Just wondering if anyone has run into this before, a first for me.

[SCREWTAPE]

I started up a irC3200 today that it looks like everything is booting up OK. Start ImagePass, start copier. Display goes through normal screens, then when it gets to the final screen it keeps saying warming up - the screen is frozen. You press tabs and nothing happens, you open a door and it keeps running. I think maybe I need to reflash the HD. Just wondering if anyone has run into this before, a first for me.

Check your IMG-CONT interface setting, it should be set to "3"

Did anyone clear MMI???

[teckat]

I started up a irC3200 today that it looks like everything is booting up OK. Start ImagePass, start copier. Display goes through normal screens, then when it gets to the final screen it keeps saying warming up - the screen is frozen. You press tabs and nothing happens, you open a door and it keeps running. I think maybe I need to reflash the HD. Just wondering if anyone has run into this before, a first for me.

to add on>see if u can quickly get in service mode
Check your Error History for any E004 codes

[kuby]

IMG-CONTis set to "3". Do not know about MMI clear. Do I need to try that? What if someone has already done it?

=======================================
update

I checked the IMG-CONT it was set right but I entered '3' again. Shut machine down and reboot - it is working. You figure.

[teckat]

IMG-CONTis set to "3". Do not know about MMI clear. Do I need to try that? What if someone has already done it?

Did u check ERROR HISTORY LOG ????

Also check for a stuck key on panel/ keys-buttons when pressed should have a nice feel of a return

[SCREWTAPE]

I would also inspect further more..

But Glad your up again.

[teckat]

IMG-CONTis set to "3". Do not know about MMI clear. Do I need to try that? What if someone has already done it?

=======================================
update

I checked the IMG-CONT it was set right but I entered '3' again. Shut machine down and reboot - it is working. You figure.

good fix= just make sure that the interface cable from C1 to 3200 is secure & in good order


the original C1's and 3200's have had Communications issues like that before & still do/
what ver. is your C1= it is shown on USER DATA Print out/ + what ver. is the 3200 at ??

[gezeo750]

Hey guys I'm having another problem with my 3200. I keep getting the message that the print server (with network connection) has shut down. This happens after having pressed the printer status/setting button, and the wating screen has disappeared. Any ideas?

[kuby]

C3200 ver 90.03
C1 Server info ver 2.1

[SCREWTAPE]

Hey guys I'm having another problem with my 3200. I keep getting the message that the print server (with network connection) has shut down. This happens after having pressed the printer status/setting button, and the waiting screen has disappeared. Any ideas?

Can you explain more about what your experiencing.