Image press c1 jam 010d

[Van Steal]

Has anybody EVER had any luck fixing this jam code A4 only.?? Done all the mods (ps15/16 springs) sep drive gear, oiled fixing belt(and replaced it!!) Replaced sensors related to code. Replaced pre fixing belt ass'y. Checked fixing pcb. This jam code starts to come in to m/c after about 30k. M/C upgraded to latest version. Have it on about 5 C1's. Help anyone

[seeb]

I have a C1 that had intermittent 010D jams on LTR paper. Replacing the upper fuser roller and lower fixing belt fixed it.

[SCREWTAPE]

Has anybody EVER had any luck fixing this jam code A4 only.?? Done all the mods (ps15/16 springs) sep drive gear, oiled fixing belt(and replaced it!!) Replaced sensors related to code. Replaced pre fixing belt ass'y. Checked fixing pcb. This jam code starts to come in to m/c after about 30k. M/C upgraded to latest version. Have it on about 5 C1's. Help anyone

Check the Mount Separation Drive Assembly: FM2-7983-000, this drives the lower fixing belt assembly.
Before removing the mount assembly be sure to scribe the two mounting brackets.

[Van Steal]

Thanks Guys, have try both tips with no joy but will keep trying

[teckat]

Has anybody EVER had any luck fixing this jam code A4 only.?? Done all the mods (ps15/16 springs) sep drive gear, oiled fixing belt(and replaced it!!) Replaced sensors related to code. Replaced pre fixing belt ass'y. Checked fixing pcb. This jam code starts to come in to m/c after about 30k. M/C upgraded to latest version. Have it on about 5 C1's. Help anyone

Had success playing around with Level 2 settings below
after replacing all that other crap

can't exactly remember some settings/
in Level 2> COPIER>ADJUST>FEED-ADJ

REG-SPD Make a fine adjustment of the registration motor speed at constant speed.
Change the registration speed at constant speed in the range of + or - 10 scales
against the default value.
Setting range 2
-10 to 10
Standard value
0

REG-SPD2 Make a fine adjustment of the registration motor speed at 1/3 speed.
Change the registration speed at 1/3 speed in the range of + or - 10 scales against
the default value.
Setting range 2
-10 to 10
Standard value
0



**just to add on /if u have a Counter installed/ or Equitrc - set in
OPTION/ACC >CC-SPSW to 1 also in Level 2

U probably already know that !!

[Phatnezz]

Had success playing around with Level 2 settings below
after replacing all that other crap

can't exactly remember some settings/
in Level 2> COPIER>ADJUST>FEED-ADJ

REG-SPD Make a fine adjustment of the registration motor speed at constant speed.
Change the registration speed at constant speed in the range of + or - 10 scales
against the default value.
Setting range 2
-10 to 10
Standard value
0

REG-SPD2 Make a fine adjustment of the registration motor speed at 1/3 speed.
Change the registration speed at 1/3 speed in the range of + or - 10 scales against
the default value.
Setting range 2
-10 to 10
Standard value
0



**just to add on /if u have a Counter installed/ or Equitrc - set in
OPTION/ACC >CC-SPSW to 1 also in Level 2

U probably already know that !!

i am currently having the same issue. It only happens in the morning when you turn on the copier. I’ve followed the canon 010d pdf and replced the springs but its still jamming. I am going to try this next, just to be clear if i set reg-spd to +6 theb i would have to set reg-spd2 to +2??

[zoraldinho]

I hope you realize that the post is from 2010 and probably nobody has C1 anymore.