Preventive measures for possible color displacement in the paper feed (sub scanning) and the main scan (front
to rear) direction
read this pdf for 3200-3220
iR3200-3220 TP03.pdf
I'm such a nice guy
Preventive measures for possible color displacement in the paper feed (sub scanning) and the main scan (front
to rear) direction
read this pdf for 3200-3220
iR3200-3220 TP03.pdf
I'm such a nice guy
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Firmware is important too.
Especially DCCON.
When I used to work on these, I had that Tech pub in my bag.
Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC
Yes,its true
"Who loves the roses,must also bear thumbs"
Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
In Service Mode missing some commands like Adjust-V-COUNT,COLOR,HV-PRI,HV-TR ETC
What is missing is a controlling command like this : VBACK-Y/M/C/K (Used to adjust electric potential for removing image fog. My copier fault)
As you think my copier needs firmware.I dont have it and i need it.
Please can you help me?
tinnyjay@hotmail.com
"Who loves the roses,must also bear thumbs"
Adjust-V-COUNT,COLOR,HV-PRI,HV-TR
adjustments are in Level 2
level2.JPG
level2_2.JPG
L2_3.JPG
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks