iPRC7000VP E020-0281

[teckat]

Zip-it.JPGSafety no brain.JPG

[hory_143]

Hello,

Have any find the possible solution for this problem on the mashine?
E822-1603-05

[teckat]

Hello,

Have any find the possible solution for this problem on the mashine?
E822-1603-05

Track to a Fan, were u working inside printer before code
??

[hory_143]

Hi,
The Machine works great i become this error on startup, i see in a old sm that is a fan 3, but this mashine dont have this fan fm323.
The software on the maschine is recently updated, but is it every time the same code on start up.
He works well when i reset the err and dcon.
Have any some ideas?

[emir]

Hello, did you find the solution for that eroor

[teckat]

Hi,
The Machine works great i become this error on startup, i see in a old sm that is a fan 3, but this mashine dont have this fan fm323.
The software on the maschine is recently updated, but is it every time the same code on start up.
He works well when i reset the err and dcon.
Have any some ideas?

Don't see any sub codes for e822-1603 on this series.

[hory_143]

in the new manual i dont see this error only in the old manual,
in manual is the the error yode with y603, in the new i cant find the error code...
i look here at the site most of answer is that the possible answer is in manual rev 0 110410 but i cant find the manual..

[emir]

this machine is VP7010 and has modification on fans vp 6000 and 7000 has 4 fans this has 2 big fan

[teckat]

in the new manual i dont see this error only in the old manual,
in manual is the the error yode with y603, in the new i cant find the error code...
i look here at the site most of answer is that the possible answer is in manual rev 0 110410 but i cant find the manual..

---

take a look at rotation of the cooling fans

do a monotonous check of fans in I/O mode

[NorthW]

Seems the engine is looking for fan rotation of fan that have been removed for the air kit, check the instructions again, there must be a necessary change made to a service bit switch in service mode.