Thanks: 
Likes: 
Dislikes: ================================================== =========Originally Posted by hasan5900
trace your work steps before code
error code is not listed anywhere--------------------NOW CALL CANON in your area
================================================== =========
trace your work steps before code
error code is not listed anywhere--------------------NOW CALL CANON in your area
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Hi any access to to revison manual Canon ImagePress 7010 Service Manual revision 0 110410,
trying to fix error E822-1603, its referring to a fan that has been modified from C7000 to C7010
Hello, please do not know the mistake I hope that you let me know any idle fan
================================================== ====================
no information/ contact Canon in your area
Check for any disconnection/improper connection on any fans in areas u were working
E822 ===Error in a Delivery Fan ----
When detecting phase unlock for 2 sec consecutively when 10 sec elapsed after the fan was turned on
-1603===no 603 "FAN" number listed in any pubs. or manual or updates on any imagePress models.
1: means it's a detection at power on ------bet you have a unplugged or poor connection
-05===location is Printer.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
================================================== ====================
no information/ contact Canon in your area
Check for any disconnection/improper connection on any fans in areas u were working
E822 ===Error in a Delivery Fan ----
When detecting phase unlock for 2 sec consecutively when 10 sec elapsed after the fan was turned on
-1603===no 603 "FAN" number listed in any pubs. or manual or updates on any imagePress models.
1: means it's a detection at power on ------bet you have a unplugged or poor connection
-05===location is Printer.
Moved to new premises, put machine together, error E0822-1603, originally machine was 7000vp but upgraded to 7010vp, so the fan has been replaced as per image
error E00822-1603.jpgso how do i reset the machine to the new config, the 7010vp service manual is referring me to Service manual Rev 0 110410 so if anyone has access a copy would be appreciated
Last edited by digital5; 08-22-2016 at 05:40 PM.
Who told u that u can convet. 7000 to 7010_?
By adding a fan.
Call the person.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
seriously, i need a resolution to a issue, and you are making it petty,i don't have the time or the mindset for this sort of crap
the only resolution u deserve " Get an Education on the Products you Tamper With "
"You created that ERROR CODE"
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
thank you, I could express i opinion in more colourful language but i wont bother
Stop wasting time on this forum.
You plainly show that you are not a tech, but a wanabe person.
I have fired many a person like you.
You personally create a error situation on a printer, and now expect someone in this forum to resolve your bad habits.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Reply With Quote
Bookmarks