iPRC7000VP E020-0281

[teckat]

Remember, in this series

When this product is powered OFF it will take approxiately 10 seconds for the 24v Power Supply to discharge to 0v.

If the Main Power Switch is quickly turned ON before enough voltage has been discharged from any of the e8xx-xxxx Error Codes they may be falsely detected.

Have seen keyops flip power switch off/on back and fourth in frustration.

Instruct the operator to wait at least 10 seconds after shutdown before turning the Main Power Switch "On".

[hory_143]

hi and thanks for the answers,

all possible solution I have checked,
changed the fans, new sw,
I made by the old manual the fan check and the machine say ok. I don't know what can I do more to slove this problem?

[teckat]

hi and thanks for the answers,

all possible solution I have checked,
changed the fans, new sw,
I made by the old manual the fan check and the machine say ok. I don't know what can I do more to slove this problem?

---

did u check in ALARM CODES ??

can u isolate the deck> unplug it--then power off--on printer to check


DC controller PCB
1-2_________________u may need to replace assembly --may have a short or grounding issue

do u have dedicated outlets for this printer ???


e822 has no clear offer in service mode CLEAR>ERR ???


When a following error occurs, after taking appropriate action (remedy), be sure to turn ON the power, and then select the following to execute ERR: COPIER > FUNCTION
> CLEAR > ERR. The error is cleared by turning OFF and then ON the power after ERR execution.
E000, E001, E002, E003, E004, E013, E717, E719
For errors other than those described above, the error is cleared by turning OFF and then ON the power after taking appropriate action (remedy).
-When turning ON the power, be sure to turn ON the power in the following order: pickup/delivery accessories -> Main Body: Otherwise the pickup/delivery accessories are
not recognized



are u doing DCon clear to get printer up ????--or is printer down ????


post your picture of that code ----see example

EXAMPLE PIC
code.jpg