CLC 3220 magenta fat lines

[Esperanta]

Dear experts,

I have a CLC 3220 machine with 48k print/copy for now.
I have a magenta color issue, when print / copy.
I have magenta fat lines on the copy/print sheet; sometimes this fat line does not appear on the printed/copied sheets. These fat lines appear either if the print is full color or small percentage of color.
20101029123625_00001.jpg20101029120826_00001.jpg
Please any suggestions

[slybot]

looking at your examples i would say you have either a faulty cyan dev unit or a faulty cyan drum (assuming it is a 4 drum machine) that is where i would start at this point in time

[SCREWTAPE]

Whats the meter on this unit. And what kind of service has been done in the last 6 months.

Looks like drums for now.

[Esperanta]

the last service was before 6 months.

the misc show Y-DRM-LF 75, M-DRM-LF 110, C-DRM-LF 110, B-DRM-LF 115

[SCREWTAPE]

What was done?

[badboys]

You can start with cleaning the magenta drum unit & the magenta transfer roller inside ITB assy. If cleaning fails then replace it both.

[SCREWTAPE]

You can start with cleaning the magenta drum unit & the magenta transfer roller inside ITB assy. If cleaning fails then replace it both.

Not a big fan of those options.

But he can try.

[Esperanta]

You can start with cleaning the magenta drum unit & the magenta transfer roller inside ITB assy. If cleaning fails then replace it both.

this not work.

any other tips guys

[zoraldinho]

Make force stop in the middle of yob,pull out the drums and check witch one is the problem.

[teckat]

this not work.

any other tips guys

BOTTOM LINE IS=REPLACE ALL DRUMS AT SAME TIME/

Look at your posted color document/ notice something ??

if u understand the Color Process u will know what I mean -
subtractiveprimaries.png