Canon Pixma ip 4300 DEAD

[lary leon14]

I have a dead printer Canon pixma ip 4300.
The power supply unit take out only 8 volt's,but i dont have any wiring diagram to see if it's correct!
I think it might has a 12v and 32v but i dont know in which pin of the cn 305 (i think),and if it has to be fitted in the logik board to activate the power supply.
Any advice?
Thank you!
The printer has 3 years of life(someone told me that GAME IS OVER!).

[lary leon14]

Noone?
Nothing?
May i have to buy a new one?

[zoraldinho]

Do you have some errors,some blinking lights?

[JustManuals]

I have this Parts & Service manual. If interested, email me at paul@justmanuals.com

[lary leon14]

No error's,no blinking light's.
The printer is off,even you press the start button!
At the output voltage of the power suplly it has only 8volts,but i think it might have 24v and 32v i think but i dont know at which pin's is the correct voltage output's!

[Ikon Princess]

Canon PIXMA iP4300 Color Ink-jet printer - 30 ppm - 300 sheets from Canon in Printers

Overview - Compare prices - Reviews - Technical specifications - Similar items - Accessories

$94 new, $74 used from 3 sellers
42 reviews
600 dpi x 600 dpi, Legal, A4, USB
PIXMA iP4300 is one fast, versatile photo printer. Thanks to its patented print head and 5-color ink system, you can quickly produce spectacular, long-lasting photos with borderless edges - from credit-card size up to 8.5" x 11" - along with bold, laser-quality text. The two paper trays let you hold both plain and photo paper, so you're always ready to print text or photos. And for convenience, you can print 2 sided without manually flipping over the page!

Maybe get a new one?

[teckat]

No error's,no blinking light's.
The printer is off,even you press the start button!
At the output voltage of the power suplly it has only 8volts,but i think it might have 24v and 32v i think but i dont know at which pin's is the correct voltage output's!

Check your AC Adapter /

is the ip4300 the same as ip4200

[lary leon14]

I think it's the same.
I have only 8 volts at the output of the power supply.

[teckat]

I think it's the same.
I have only 8 volts at the output of the power supply.

what is the AC input v / think it should be 24v
did u check that AC Adapter

[lary leon14]

The input is 220 v ac.and after a bridge it has about 300-320 v dc,but after a transformer the only voltage are 8 volts dc.
I dont know if the logic board give a trigger to the power supply,so for that reason i am looking for a wiring diagramm.