Just a thought>
what if this printer is not constantly reading A4 during the run/ could explain varying lead edge issue
Just a thought>
what if this printer is not constantly reading A4 during the run/ could explain varying lead edge issue
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
guys the issue has been resolved . I cannot point to an exact solution . I replaced the clutches . cleaned the registration assy thoroughly . adjusted the values to default . etc and viola !!!.
thats for all the help
a machine is only as good as your tech : source:screwtape ; the scary one
thanks,
GoneFishing2.jpg
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Hi David,
Glad you have it resolved,, I thought it would be the registration! I have seen the clutch slip, the brakes apply too much pressure, and the assembly binding because it was bound up.
Have a good weekend!
week end!!!! whats that . ha . well when the govt contract work comes there is no week end no holiday nothing . my machines run 24/7 for a week to a month depending on the volume. I always try to keep 5 machines running from the total 8.
a machine is only as good as your tech : source:screwtape ; the scary one
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks