It shows the error code E021..which is a dev mtr problem......the printer is noisy and quite jammed ...could it be the carosel, can't spell that one, maybe bearing at one end...I dont know...any ideas?
Thanks
It shows the error code E021..which is a dev mtr problem......the printer is noisy and quite jammed ...could it be the carosel, can't spell that one, maybe bearing at one end...I dont know...any ideas?
Thanks
You never realize how cheap a professional is until after you let an amateur do it.... and
if this was an easy thing to do then everybody would be doing it! But it isn't and they are not!!
a motor jammed noise as if it was trying to turn the dev....noisy but not snapping
You never realize how cheap a professional is until after you let an amateur do it.... and
if this was an easy thing to do then everybody would be doing it! But it isn't and they are not!!
when I put a spring hook and lifted the right side of the Carousel it moved up a 1/4" at least if not a bit more and on the left only 1/8" ...to me it could be the brg support worn out and that could be $$$$$ p and L...how much do you think it would cost?
You never realize how cheap a professional is until after you let an amateur do it.... and
if this was an easy thing to do then everybody would be doing it! But it isn't and they are not!!
any one have a part number for the Carousel so I can quote the person
Thanks
You never realize how cheap a professional is until after you let an amateur do it.... and
if this was an easy thing to do then everybody would be doing it! But it isn't and they are not!!
think that is the part #
Look Here/ HP makes that part >fits in a number of HP & Canon
HP RG5-7587-090CN Carousel (Rotary) Assembly - INCLUDES The Carousel a
is this what u want ?????
impactcomputersmiami_2129_1891562757.jpg
Last edited by teckat; 11-04-2010 at 03:58 PM.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Thats perfect! Thankyou...looks like up here the dealer cost is around $115., not bad considering what you get.....
You never realize how cheap a professional is until after you let an amateur do it.... and
if this was an easy thing to do then everybody would be doing it! But it isn't and they are not!!
So I got the part, H/P part number, and put it in yesterday...yes it looks the same but the tab slots on the right side are moved so the toners do not fit in. We fixed that issue buy cutting the tab's off but the machine doesnt recognize the cartridges are installed...so the bottom line is the part will NOT interchange..I'm stuck and I'm going to try and make 2 into 1..if anybody has a easier idea let me know asap....to take this all part again...UGH
You never realize how cheap a professional is until after you let an amateur do it.... and
if this was an easy thing to do then everybody would be doing it! But it isn't and they are not!!
I would contact HP, they have on their site that , part will function in Canon MF8180
what is the part number that was sent to you ??
http://www.precisionroller.com/drive...ils_64986.html
Last edited by teckat; 11-26-2010 at 05:54 PM.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks