Originally Posted by
pjdbm
I just picked up a ir 5055 with 180k on it and only a few years old... anyway, I got it ready for resale and I am testing it out and I notice if i leave the machine alone for an hour or so and then come back to it and press the print key, it accepts the command and goes into a "wait" for a minute or two then makes the copy,
I also noticed when the machine jammed in finisher, after removing jam and closing the finisher cover, it took a few minutes to get to "ready" again.
Is this normal for these newer Canons?
I have sleep mode set for 4 hours and machine goes into quiet mode in 1 minute.
If the machine is being used regularly its fine but when she sits it does this.
Bookmarks