i have a canon ir3570 with boot room v8.38c . i tryied to uograde the copier to work as a printer i put a boot roon v 8.38n and download a full system by sst but the copier gives me e00744-3030.
where is problem.
thanks for help
i have a canon ir3570 with boot room v8.38c . i tryied to uograde the copier to work as a printer i put a boot roon v 8.38n and download a full system by sst but the copier gives me e00744-3030.
where is problem.
thanks for help
Answer may be on the Canon e-support site:
The E744-3030 can be caused by an insufficient amount of RAM installed in the machine. Enter service mode to check the amount of RAM recognized by the machine. COPIER>DISPLAY>ACC-STS>RAM The machine should display 512MB of RAM installed.
Just to update you on what version is out now.
System Software v40.03.02
BootROM v11.43
Language v40.03 (JEFIG)*
RUI v38.01 (JEFIG)*
MEAP Cont v38.01
Pre Install App v1.40
Security Agent v1.3.0
SDL v1.1.2
SSO v1.1.2
Portal Service v2.0.0
DCON
v30.02 iR2270/2870
v30.02 iR3570/4570
RCON v13.02
SDICT v1.06 (J)*
KEY v1.01
Browser v2.01
G3 Fax Board-D1 [Dualline] v79.01
TTS v1.11 (JE)*
ALL v40.03.02 (Rev.00b)
ALL_HDF v40.03.02 (Rev.00b)
HD Format v00.11
Finisher-Q3/Q4 [STACKER] v11.01
Saddle Finisher-Q4 [SADDLE] v6.01
Puncher Unit-M1 v5.02
Finisher-S1 v14.02
Service Support Tool v4.32Ey e-Support
E744 IR4570
Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC
All right.
a second 256 sd ram solving the problem.
thanks.
Bookmarks