Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Senior Tech 250+ Posts
    Join Date
    Oct 2010
    Location
    Italy
    Posts
    264
    Rep Power
    30

    Jam 0102 on Canon iR 6570.

    I have a great problem with this code jam on Canon iR 6570 :J0102.
    Tips to solve the mistake ?
    Thanks.

  2. #2
    Service Manager 10,000+ Posts
    Jam 0102 on Canon iR 6570.

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by Ingranaggio_rotto View Post
    I have a great problem with this code jam on Canon iR 6570 :J0102.
    Tips to solve the mistake ?
    Thanks.


    imageRUNNER 6570 / 5570 / 5070


    This indicates a delay to PS28, the Laser Write Start Sensor.



    Check the condition of the Vertical Path Swing Guides. If the fins on the guides are nicked or even if the fins are worn down too much, (usually on high copy count machines) may result in improper pressure from the right side door. This may lead to the 0102 jam. The Vertical Path Swing Guides are pictured below:


    The part numbers for the guides pictured above are as follows:
    From top of the door to bottom:

    Registration Swing guide FF5-9841-000 ( Qty 1 )
    Vertical Path Swing guide FB6-6580-000 ( Qty 1 )

    Vertical Path Swing guide FB6-6579-000 ( Qty 3 )


    When jam code 0102 is occurring intermittently, inspect PS24, the Vertical Path #1 sensor and PS28, the Laser Write Start sensor.

    Make sure both sensors are clean - check for stray toner or paper dust contaminating the sensors.


    Inspect the operation of both sensor flags. Make sure the flags are not sticking or hanging up. Try putting an extra wrap on the sensor flag springs.

    Check for wear and tear on the sensor flags. If the sensor flags have paper cuts on them or the point of the flag is worn down, replace the sensor flags. Part number for PS24 sensor flag is FF5-9842-000. Part number for PS28 sensor flag is FF5-3002-030.

    Inspect wiring for PS24 and PS28.
    Try removing tie wraps from the wiring.


    If on duplexing check below>>



    imageRUNNER 5050 / 5055 / 5065 / 5070 / 5075 / 5570 / 6570 Jam Code 0102 or 0201 when Duplexing ??????
    When a duplex job is run the machine jams and logs jam code 0102 or 0201. When the jam occurs it is noted that the paper is skewed.

    The 0102 jam code description is a delay jam for the write check sensor PS28. The 0201 jam code description is a stationary jam for the registration sensor PS29.



    Reforming the bent leaf spring (FB5-3614-000) corrected the skew and jam problem. The leaf spring applies pressure to the right rear corner of the duplex tray. The following image shows an undamaged leaf spring with the duplex tray removed from the machine.

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    East Coast Imaging 2,500+ Posts
    Jam 0102 on Canon iR 6570.

    SCREWTAPE's Avatar
    Join Date
    Jan 2009
    Location
    New York City
    Posts
    3,399
    Rep Power
    69
    Try replacing the pick up, feed and sponge rollers first.
    Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC

  4. #4
    Trusted Tech 50+ Posts
    Join Date
    Apr 2012
    Location
    seremban
    Posts
    85
    Rep Power
    25

    Re: Jam 0102 on Canon iR 6570.

    Quote Originally Posted by SCREWTAPE View Post
    Try replacing the pick up, feed and sponge rollers first.
    it happen to every casset and manual feed..but single side on maual feed is ok and double side every casset and manual feed are jam

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here