Thanks: 
Likes: 
Dislikes: Prevention of a Full Displacement of the ITB (E075)
Revised procedures to address E075 error codes.
See attached PDF. for details on the prevention of a full displacement of the ITB belt (E075).
TP10.pdf
imageRUNNER ADVANCE C5051/C5045/C5035/C5030->Prevention of (E075)
Prevention of a Full Displacement of the ITB (E075)
Revised procedures to address E075 error codes.
See attached PDF. for details on the prevention of a full displacement of the ITB belt (E075).
TP10.pdf
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Perfect timing- I have a tech dealing with that issue today
Thanks Teckat for posting this useful tech pub.
Cheers
Originally Posted by fchu5959
HatTip_2.jpg
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Are the frames of these machines so weak that adjusting the cabinet affects the transfer belt tracking?
Its not the cabinet, but the level of the machine throwing the belt displacement off.
Accidents don't just happen. They must be carelessly planned.
it is a LEVEL Adjustment
all machines need to be level or u will have issues down the road
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Posting Permissions
Reply With Quote
Bookmarks