Hi,
I recently bought a clc3200 for 100€. I solved some little jams and the colours misalignment with a dc-con and mn-con clear, but i do not know how to solve the problem of dirty sheets that you see on the picture below:
DSCN0541.jpgDSCN0540.jpgDSCN0543.jpgDSCN0542.jpg
The black drum is new, just bought and installed last week, instead two color drum are at 220% of their life and the remaining drum is at 58%.
I cleared the transfer belt but in a few of second it back again covered with color... i want to print only B&W and i do not have enough money for the color drums...
How can i do? It is possible to remove color drums and leave only the black?
Thanks to all!
Bookmarks