Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Trusted Tech 50+ Posts tariq65's Avatar
    Join Date
    Jun 2010
    Location
    Lahore
    Posts
    84
    Rep Power
    0

    canon ir 6000 reset unit 1 or reset unit 2

    i an\m facing the problem in canon ir-6000 showing the massage reset unit 1 not make copy and red error light is blinking any body help me thank you .

  2. #2
    East Coast Imaging 2,500+ Posts
    canon ir 6000 reset unit 1 or reset unit 2

    SCREWTAPE's Avatar
    Join Date
    Jan 2009
    Location
    New York City
    Posts
    3,399
    Rep Power
    69
    The message Reset Unit 1 appears after the imageRUNNER boots up. This message can be caused when the imageRUNNER is unable to see the Fixing / Feeding Frame assembly. You should check the connectors for the Fixing / Feeding Frame and also the wiring between the connectors on the rear frame and the DC Controller. Sometimes the pins can become damaged or paper can get lodged inside of the connectors. If the connectors and the wiring are ok, the DC Controller may need to be replaced.



    You check this first.
    Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC

  3. #3
    Service Manager 10,000+ Posts
    canon ir 6000 reset unit 1 or reset unit 2

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    here are pics of what SCREWTAPE mentioned
    Connector02.jpgConnector01.jpg
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  4. #4
    Trusted Tech 50+ Posts bakaoni666's Avatar
    Join Date
    Mar 2010
    Posts
    56
    Rep Power
    29

    Re: canon ir 6000 reset unit 1 or reset unit 2

    Sorry, I know it was an old post. But I still having trouble with it.
    Already check the connector, replace DC. Check Wiring, switch behind the handle.

    Still Reset Unit 1.
    Help me. 2 machine with this problem.

  5. #5
    Service Manager 10,000+ Posts
    canon ir 6000 reset unit 1 or reset unit 2

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: canon ir 6000 reset unit 1 or reset unit 2

    Quote Originally Posted by bakaoni666 View Post
    Sorry, I know it was an old post. But I still having trouble with it.
    Already check the connector, replace DC. Check Wiring, switch behind the handle.

    Still Reset Unit 1.
    Help me. 2 machine with this problem.
    ================

    bottom line =
    u have a connection issue somewhere /or pinched wiring
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #6
    Trusted Tech 50+ Posts bakaoni666's Avatar
    Join Date
    Mar 2010
    Posts
    56
    Rep Power
    29

    Re: canon ir 6000 reset unit 1 or reset unit 2

    Quote Originally Posted by teckat View Post
    ================

    bottom line =
    u have a connection issue somewhere /or pinched wiring

    Still looking, haven't found it..
    i hope i can find it today.

    Thanks Mr. Teckat

  7. #7
    Austec
    Guest

    Re: canon ir 6000 reset unit 1 or reset unit 2

    Quote Originally Posted by bakaoni666 View Post
    Still looking, haven't found it..
    i hope i can find it today.

    Thanks Mr. Teckat
    Another confirmation here of listening to what teckat and Screwtape have said.

    This issue is almost always with a dodgy connector on the back of the fixing/feeder frame assembly.
    You can sometimes find removing the screws from the connector assembly at the rear of the fuser (right side connector looking at pic 2 in teckats photos) and packing it out with a couple of washers behind it before screwing back in place. This will make the connector fit more securely into the rear connector in the back of the machine. Do this if the problem is a bit intermittent rather than a constant indication.

    But whatever you find it will be poor wiring or connector between the fixing/feeder frame unit & the DC Controller. I've never had to replace the DC Cont to fix it yet.

  8. #8
    Service Manager 5,000+ Posts
    canon ir 6000 reset unit 1 or reset unit 2

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: canon ir 6000 reset unit 1 or reset unit 2

    Had this exact fault a few weeks ago. It turned out to be the small micro switch that detects the unit 1 handle is in the home position, simply bend the switch arm so it makes better contact or replace the switch.
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  9. #9
    Trusted Tech 50+ Posts bakaoni666's Avatar
    Join Date
    Mar 2010
    Posts
    56
    Rep Power
    29

    Re: canon ir 6000 reset unit 1 or reset unit 2

    Quote Originally Posted by copier tech View Post
    Had this exact fault a few weeks ago. It turned out to be the small micro switch that detects the unit 1 handle is in the home position, simply bend the switch arm so it makes better contact or replace the switch.
    This is the first thing i did to make sure that switch is fine.

  10. #10
    Tech Specialist 1,000+ Posts Canuck's Avatar
    Join Date
    Nov 2007
    Location
    Southwestern Ontario
    Posts
    1,713
    Rep Power
    63

    Re: canon ir 6000 reset unit 1 or reset unit 2

    You metered the switch? For continuity? Is there voltage at the switch? Have changed a few switches on these

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here