Faint ghostly dots printing on paper

[charm5496]

the canon lasers get dirty after a while with a dirty film that can give you some crappy image quality.
also keep in mind that if you put a "NEW" developer assembly in that your image quality will be light until that unit breaks in. This usually takes 100K or so depending on what your customer is running.

[kingpd@businessprints.net]

Thanks Charm. Is there any way to break them in quicker or compensate with the charge figures? Also, I'm going to post on another forum, but if anyone has the part number for the whole developer assembly unit (the one you just slide in with two connectors and 7 screws) I'll most likely be needing to buy one so if anybody has one and pricing, etc., please let me know.

the canon lasers get dirty after a while with a dirty film that can give you some crappy image quality.
also keep in mind that if you put a "NEW" developer assembly in that your image quality will be light until that unit breaks in. This usually takes 100K or so depending on what your customer is running.