Originally Posted by
TCA TECH
Hi Guy's
I have been getting ongoing errors on this machine, previously lots of 00001 errors. I have replaced thermistors, wiring loom and connectors to fuser assembly which seamed to fix, now i keep getting 000006-0001, not much info and reset fixes for a couple of days.
Any idea's
Check that the 57T fuser drive gear is not damaged - part number FU5-0176-010.
FU.JPG
imageRUNNER C5800 / C6800 / C5870U / C6870U Error Code E006
Intermittently, the machine will code into an E006.
When the fixing/feeder drawer is engaged, signal FSR-UNIT-CNCT is generated to tell the DC Controller that the drawer is properly connected.
The signal is wired via a loopback to connector J434-B9 & J434-B10 located on the rear of the fuser assembly. Remove the connector and check for a pinched wire in the loopback cable.
Bookmarks