Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Technician
    Join Date
    May 2008
    Location
    BAGHDAD,IRAQ
    Posts
    10
    Rep Power
    33

    printer canon ix4000 error code 6500

    my printer canon ix4000 give me error 6500 what`s that mean????????

  2. #2
    Service Manager 10,000+ Posts
    printer canon ix4000 error code 6500

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by atheer View Post
    my printer canon ix4000 give me error 6500 what`s that mean????????

    Other hardware error [6500] - Logic board ass'y (QM2-3393 / QM3-1654)
    *1

    *1: Before replacement of the logic board ass'y, check the waste ink amount (by service test print or EEPROM information print).

    <Service mode operation procedures>
    1) With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button. (DO NOT release the buttons. The Power LED lights in green to indicate that a function is selectable.)
    2) While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.)
    3) While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons.
    (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green,
    starting with Alarm LED.)
    4) When the Power LED lights in green*1, press the Resume/Cancel button the specified number of time(s) according to the function listed in
    the table below. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power
    in green, starting with Alarm LED.)
    EP.JPG


    Service test print
    <EEPROM information contents>
    On the service test print (sample below), confirm the EEPROM information as shown below. (The information is given in the upper portion of
    the printout.)
    iX5000 (iX4000): Model name
    JPN: Destination
    Vx.xx: ROM version
    USB (xxxxxx): USB serial number
    FA = xx xx xx: Reserved for plant use
    D = xxx.x: Waste ink amount (%)
    AB (C = OK Y = ...): Ink system check result
    Note: The waste ink amount should be confirmed by EEPROM information print (not by service test print).

    tp.JPG

    If the waste ink amount is 7% or more, also replace the ink absorber kit (QY5-0164) when replacing the logic board ass'y.

    QM2-3393: iX5000 logic board ass'y
    QM3-1654: iX4000 logic board ass'y
    Last edited by teckat; 12-18-2010 at 08:43 PM.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here