Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 25
  1. #11
    Service Manager 10,000+ Posts
    Canon IR5075 ADF Problem - Jam Code 0094

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,491
    Rep Power
    219

    Re: Canon IR5075 ADF Problem - Jam Code 0094

    Quote Originally Posted by bbkyle14 View Post
    please help me to solve my problem.... i have canon ir 7105 machine.... its always jam when i start to use adf... jamming code 0094..... guys i really need your help.... thank you

    imageRUNNER 7105

    The quickest way to troubleshoot a 0094 is to use the FEEDER IO section found in service mode. COPIER>IO>FEEDER.

    The sensors listed that can cause a 0094 jam are PI4 / PI12 / PI13 / S1 / S2 / S3 / S4 / S5 / S9.
    Each of these sensors should be 0 no paper and 1 when paper is detected.

    Use the IO mode to detect faulty sensor reading.

    COPIER>IO>FEEDER.
    P001 bit 1 = S2
    P004 bit 7 = S9
    P006 bit 4 = S4 P006 bit 7 = S3
    P007 bit 1 = PI4 P007 bit 4 = S5 P007 bit 6 = S1
    P008 bit 6 = PI13 P008 bit 7 = PI12




    imageRUNNER 7105 / 7095
    DADF-Q1

    DADF-Q1 0094 Jam Code

    Jam code 0094 is logged when the start button is pressed and using the DADF-Q1.
    The original does not feed and power cycling the copier is the only way to reset the jam.
    --------------

    Clean paper dust from the DADF sensors and perform the sensor adjustment on page 4-22 to 4-23 of the DADF-Q1 Service Manual.

    The following image shows the procedure from the Service Manual highlighted in red.


    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  2. #12
    Technician saidone's Avatar
    Join Date
    Mar 2012
    Location
    Banda Aceh
    Posts
    12
    Rep Power
    13

    Post Re: Canon IR5075 ADF Problem - Jam Code 0094

    IR 5075 machine, ADF problem, paper jam after replace inner roller and all rubber roller. It run several sheets of paper and jammed, so on and so on. How to solve it?
    THX.


  3. #13
    Service Manager 10,000+ Posts
    Canon IR5075 ADF Problem - Jam Code 0094

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,491
    Rep Power
    219

    Re: Canon IR5075 ADF Problem - Jam Code 0094

    Quote Originally Posted by saidone View Post
    IR 5075 machine, ADF problem, paper jam after replace inner roller and all rubber roller. It run several sheets of paper and jammed, so on and so on. How to solve it?
    THX.


    Codes
    Paper size
    Copies or prints or on both



    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  4. #14
    Field Supervisor 500+ Posts dan7777's Avatar
    Join Date
    Dec 2012
    Location
    Bristol
    Posts
    568
    Rep Power
    20

    Re: Canon IR5075 ADF Problem - Jam Code 0094

    Quote Originally Posted by pcernicky View Post
    Copier has a Jam code 0094,
    When the copier is turned on without using adf everything is ok, but as soon as I put a sheet of paper to ADF and hit start, copier shows paper jam. When you turn of and on jam is gone.
    I clean all sensors and reflective pads.

    Please help.

    Thank you all.
    0094 in adf is a hard one. It means one of the sensors is blocked or failed when machine turned on. Some of them are hidden. I do not have but one or two of those models any more so I am used to the advanced models. Have had to swap out two doc feeders for this code. You basically have to check every sensor.


  5. #15
    Expert 50+ Posts Raoufselwaness's Avatar
    Join Date
    Nov 2008
    Location
    cairo
    Posts
    62
    Rep Power
    20

    Re: Canon IR5075 ADF Problem - Jam Code 0094

    hi;
    i have ir7105 at customer site, soddenly stopped printing, but i can ping it from any pc on network
    also i can scan to any pc on network.
    tried to reinstall the driver but no good
    i used UFR II and the pcl v.15 and v87 and the driver can not detect the printer
    please help
    thanks raouf


  6. #16
    Service Manager 10,000+ Posts
    Canon IR5075 ADF Problem - Jam Code 0094

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,491
    Rep Power
    219

    Re: Canon IR5075 ADF Problem - Jam Code 0094

    Quote Originally Posted by Raoufselwaness View Post
    hi;
    i have ir7105 at customer site, soddenly stopped printing, but i can ping it from any pc on network
    also i can scan to any pc on network.
    tried to reinstall the driver but no good
    i used UFR II and the pcl v.15 and v87 and the driver can not detect the printer
    please help
    thanks raouf

    Perform the following steps:

    1. Press the [Counter Check] button on the copier control panel.

    2. Press the [Device Configuration] button on the LCD screen.

    3. Scroll down through all of the available pages on this Device Configuration screen. Look for either PS, PCL or UFRII. The methods listed here (ex. PS, PCL, or UFRII) are installed and are available for printing.

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  7. #17
    Junior Member
    Join Date
    Oct 2014
    Location
    jakarta
    Posts
    5
    Rep Power
    0

    Re: Canon IR5075 ADF Problem - Jam Code 0094

    igot jam 0094 to

    copier>I0>Feeder
    P0003 - 0(0/1)000000

    i have P0003 bit 1 with 0 and 1 blink
    what is mean.
    pls help.


  8. #18
    Service Manager 10,000+ Posts
    Canon IR5075 ADF Problem - Jam Code 0094

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,491
    Rep Power
    219

    Re: Canon IR5075 ADF Problem - Jam Code 0094

    Quote Originally Posted by nardinard View Post
    igot jam 0094 to

    copier>I0>Feeder
    P0003 - 0(0/1)000000

    i have P0003 bit 1 with 0 and 1 blink
    what is mean.
    pls help.


    Sensor bit check in I/O mode Blinking on n' off can mean a few things depending on type and location of sensor.

    Could be loose flag action, short in connection, dirty led face, improper voltages.

    What is model ?

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  9. #19
    Junior Member
    Join Date
    Oct 2014
    Location
    jakarta
    Posts
    5
    Rep Power
    0

    Re: Canon IR5075 ADF Problem - Jam Code 0094

    Quote Originally Posted by teckat View Post
    Sensor bit check in I/O mode Blinking on n' off can mean a few things depending on type and location of sensor.

    Could be loose flag action, short in connection, dirty led face, improper voltages.

    What is model ?
    canon IR5075.
    thx for replay


  10. #20
    Service Manager 10,000+ Posts
    Canon IR5075 ADF Problem - Jam Code 0094

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,491
    Rep Power
    219

    Re: Canon IR5075 ADF Problem - Jam Code 0094

    Quote Originally Posted by nardinard View Post
    canon IR5075.
    thx for replay

    what Dadf do u have ????

    copier>I0>Feeder
    bit 1
    P0003 - 0(0/1)000000

    5075 Printer Service Manual --
    FEEDER
    P003 Bit 1 = is the feed motor current setting CUT ????


    S1 Manual
    I/O >FEEDER
    SL1 P003-1 1:ON SL-CHK>1




    DADF-M1
    DADF-S1
    Title :
    0094 Jam Code
    The document feeder is generating a 0094 jam code that will not clear until the machine is power cycled.

    A 0094 jam code can be generated by any paper path sensor in the document feeder.
    Any of the path sensors (PI1, PI11, PI12, PCB2, PCB3, PCB4) can cause a 0094 jam code.



    Solution :

    Returning the prism for PI7(DADF M1) / PCB2(DADF S1) to its proper position, resolved this issue.

    See photo below for location of sensor prism.

    ================================================== ==================================================

    EXAMPLE---------------------a foreign object was found interfering with the flag actuator operation of PI11.
    The picture below shows the location of PI11.



    Last edited by teckat; 01-13-2018 at 03:52 PM.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here