imageRUNNER 7105
The quickest way to troubleshoot a 0094 is to use the FEEDER IO section found in service mode. COPIER>IO>FEEDER.
The sensors listed that can cause a 0094 jam are PI4 / PI12 / PI13 / S1 / S2 / S3 / S4 / S5 / S9.
Each of these sensors should be 0 no paper and 1 when paper is detected.
Use the IO mode to detect faulty sensor reading.
COPIER>IO>FEEDER.
P001 bit 1 = S2
P004 bit 7 = S9
P006 bit 4 = S4 P006 bit 7 = S3
P007 bit 1 = PI4 P007 bit 4 = S5 P007 bit 6 = S1
P008 bit 6 = PI13 P008 bit 7 = PI12
imageRUNNER 7105 / 7095
DADF-Q1
DADF-Q1 0094 Jam Code
Jam code 0094 is logged when the start button is pressed and using the DADF-Q1.
The original does not feed and power cycling the copier is the only way to reset the jam. --------------
Clean paper dust from the DADF sensors and perform the sensor adjustment on page 4-22 to 4-23 of the DADF-Q1 Service Manual.
The following image shows the procedure from the Service Manual highlighted in red.
Bookmarks