Page 1 of 3 123 LastLast
Results 1 to 10 of 26
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Feb 2010
    Posts
    66
    Rep Power
    0

    Canon IR5075 ADF Problem - Jam Code 0094

    Copier has a Jam code 0094,
    When the copier is turned on without using adf everything is ok, but as soon as I put a sheet of paper to ADF and hit start, copier shows paper jam. When you turn of and on jam is gone.
    I clean all sensors and reflective pads.

    Please help.

    Thank you all.

  2. #2
    Lead Service Technician 1,000+ Posts mrfixit51's Avatar
    Join Date
    Oct 2008
    Location
    Clinton, Iowa
    Posts
    1,976
    Rep Power
    54
    0094 Jam Code: Spring comes off actuator of No.2 read sensor found in DADF-S1 (Rank A)

    [ Case in the field ]
    Description
    Since the spring came off the actuator of No.2 read sensor (PI11), the jam code "0094" persisted.
    - 0094 Jam Code: Power-on jam in the document feeder side. This machine is programmed to display this jam code when the document feeder starts picking up the first original, not immediate after switch-on of this machine.


    Field Remedy
    1. Check if paper gets jammed at a sensor; if so, remove the paper.
    2. Clean all sensors and then execute the following service mode: Service mode > FEEDER > SENS-INT.
    3. If the symptom still occurs, check if the spring has come off the actuator of No.2 read sensor (PI11); if so, attach it again.

    0094 Jam Code and message "Open the feeder cover." occur when using ADF

    [ Inspected by Canon Inc. ]
    Description
    Since the jam code "0094" and the message "Open the feeder cover" appeared when using the ADF, the reader controller data was entered again.
    - 0094 Jam Code can be displayed when the cover open/close detecting sensor of the ADF detects an unexpected opening of the cover.


    Cause
    Since the reader controller data was corrupted, 0094 jam, which was not indicated under normal condition, was indicated.


    Field Remedy
    1. In service mode > COPIER > Function > CLEAR > R-CON, select the OK key and turn the main power switch OFF/ON to clear the data of the reader controller PCB.
    2. Enter the values of the service label (affixed to the backside of the reader front cover) into service modes.
    2-1. Image read start position adjustment (X direction in fixed reading mode)
    Service mode > COPIER > Adjust > ADJ-XY >ADJ-X
    2-2. Image read start position adjustment (Y direction in fixed reading mode)
    Service mode > COPIER > Adjust > ADJ-XY >ADJ-Y
    2-3. Shading position adjustment (in fixed reading mode)
    Service mode > COPIER > Adjust > ADJ-XY > ADJ-S
    2-4. Feeder mode main scanning position adjustment
    Service mode > COPIER > Adjust > ADJ-XY > ADJ-Y-DF
    2-5. ADF stream reading CCD reading position adjustment
    Service mode > COPIER > Adjust > ADJ-XY > STRD-POS
    2-6. Density manipulating value adjustment
    Service mode > COPIER > Adjust > CCD > DFCH-G2
    Service mode > COPIER > Adjust > CCD > DFCH-G10
    (After entering the values to these modes, be sure to execute service mode > COPIER > Function > DF-LNR.)
    2-7. Original stop position adjustment (X direction in stream reading mode)
    Service mode > FEEDER > Adjust > DOCST
    2-8. Original feed speed (magnification) adjustment
    Service mode > FEEDER > Adjust > LA-SPEED
    3. Execute the following adjustments.
    3-1. ADF sensor sensitivity adjustment
    Service mode > FEEDER > Function > SENS-INT
    3-2. Tray width adjustment
    Service mode > FEEDER > Function > TRY-A4
    Service mode > FEEDER > Function > TRY-A5R
    Service mode > FEEDER > Function > TRY-LTR
    Service mode > FEEDER > Function > TRY-LTRR
    3-3. White plate data adjustment
    Service mode > COPIER > Function > CCD > CCD-ADJ
    3-4. ADF white level adjustment
    Service mode > COPIER > Function > CCD > DF-WLVL1
    Service mode > COPIER > Function > CCD > DF-WLVL2
    Note: The white plate data adjustment must be performed prior to the ADF white level adjustment.

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Feb 2010
    Posts
    66
    Rep Power
    0
    So you think it's not the sensor PCb's?

  4. #4
    Service Manager 1,000+ Posts
    Canon IR5075 ADF Problem - Jam Code 0094

    charm5496's Avatar
    Join Date
    Apr 2008
    Posts
    2,388
    Rep Power
    64
    probably PCB 2 & PCB 4
    Accidents don't just happen. They must be carelessly planned.

  5. #5
    Service Manager 10,000+ Posts
    Canon IR5075 ADF Problem - Jam Code 0094

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by pcernicky View Post
    Copier has a Jam code 0094,
    When the copier is turned on without using adf everything is ok, but as soon as I put a sheet of paper to ADF and hit start, copier shows paper jam. When you turn of and on jam is gone.
    I clean all sensors and reflective pads.

    Please help.

    Thank you all.


    Additional Info to add on>>




    imageRUNNER 5050 / 5055 / 5065 / 5070 / 5075 / 5570 / 6570
    imageRUNNER C5058 / C5068 / C5800 / C5870 / C6800 / C6870
    DADF-M1
    DADF-S1
    0094 Jam Code
    The document feeder is generating a 0094 jam code that will not clear until the machine is power cycled. A 0094 jam code can be generated by any paper path sensor in the document feeder.


    Returning the prism for PI7(DADF M1) / PCB2(DADF S1) to its proper position, resolved this issue.

    See photo below for location of sensor prism.

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #6
    Service Manager 10,000+ Posts
    Canon IR5075 ADF Problem - Jam Code 0094

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    more add on>>>


    April 11, 2008
    imageRUNNER 5050 / 5055 / 5065 / 5075
    DADF S1
    0094 Jam Code
    The document feeder is generating a 0094 jam code that will not clear until the machine is power cycled.

    A 0094 jam code can be generated by any paper path sensor in the document feeder. PI1, PI11, PI12, PCB2, PCB3 and PCB4 can cause this type of jam.



    In this instance, a foreign object was found interfering with the flag actuator operation of PI11.

    The picture below shows the location of PI11.










    The machine displays a 0094 jam code when the DADF is used. At the start of operation the presence of an original has been detected by a sensor in the paper path. The sensors that generate the code are PCB2 the Post separation sensor pcb, PCB3 the Read sensor, PCB4 the Delivery/reversing sensor pcb.
    All three sensors have the same part number FM2-1022-000.

    DADF.jpg
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  7. #7
    Service Manager 250+ Posts
    Join Date
    Nov 2009
    Posts
    267
    Rep Power
    33
    I bet on SENS-INT

  8. #8
    Trusted Tech 50+ Posts
    Join Date
    Feb 2010
    Posts
    66
    Rep Power
    0
    Quote Originally Posted by Fer View Post
    I bet on SENS-INT

    Yes. That did it.

    Thank you very much.

  9. #9
    bbkyle14
    Guest

    Re: Canon IR5075 ADF Problem - Jam Code 0094

    please help me to solve my problem.... i have canon ir 7105 machine.... its always jam when i start to use adf... jamming code 0094..... guys i really need your help.... thank you

  10. #10
    Lead Service Technician 1,000+ Posts mrfixit51's Avatar
    Join Date
    Oct 2008
    Location
    Clinton, Iowa
    Posts
    1,976
    Rep Power
    54

    Re: Canon IR5075 ADF Problem - Jam Code 0094

    Just fought this a while back on an iRA6055. The registration sensor on that beasty uses a prismatic reflector, mine had been knocked out of place. Symptoms were exactly as you described.
    "Once a King, always a King, but once a Knight is enough!"

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here