Conecting Imagepass H1 with iRC5185

[Apach]

Is it possible to connect Imagepass H1 on iRC5185 (not CLC) without replacing the PCB's and/or the SW?

[teckat]

Is it possible to connect Imagepass H1 on iRC5185 (not CLC) without replacing the PCB's and/or the SW?

How was this machine first set up ??? = Copier only/ ? Printer/Copier with Multi-PDL KIT ?


READ THIS 5185 INFO~~~~~~~~~~~~
imagePass H1 Info TP08 144.pdf

imagePass H1 Install.pdf

iR5185 Service GU .pdf

[charm5496]

if the machine has any license keys installed in it you will have to transfer them out or deactivate them. The only other thing you might run into is a firmware mismatch between the H1 and the machine. If one is higher and the other has not been updated recently then they are not going to talk the way they should.

You can verify what is installed on the machine by going to counter check and device configuration. You will see PS and PCL listed if it has those kits installed.