iRC3200/3220 Counter Problem

[teckat]

hi..on canon ir2018 when you push 123 key it does not display the counter as in ir 2016
i am wondering why?is there any settings to make it display the counter?
thanks

this discussion is for the iR3200/3220 ???

where do u see a 123 counter for the iR2016 ????
IR2016.JPG

[charm5496]

I think he was talking about the actual counter check button on the control panel. It has a '123' on it.1496_001.jpg

[teckat]

Bright idea.jpg
Thanks~~~~~~~~~~~~~~~~
have to learn and read in between the thoughts

[doktor]

Hi guys,

Have these problem with iRC3200/3220 in printer properties I have set it in default only print 'black and white' that mean if you have color it will print black and white copies only.

After printing I check the counter by right the counter 113-Total(Black/Small) will increase but in my case the counter 123-Total(Full color+single color/small) will increase not counter 113.

For normal copying the counter is working accordingly. Any idea what's wrong with the machine ? Possible with the printer driver ?

If I remember proper the Word B&W print counting is right, PDF B&W counting 1x B&W
+ 1x color.

[charm5496]

I have the same problem sometimes teckat

[Blues Guy]

Morning to you guys,

Thank you so much to all of you who have been response to my topics.

DLP you got my question right what I'm facing with that machine. The machine using WITHOUT a image pass and current now just using a normal printer driver iRC3200/3220 PCL5c driver. In the driver properties as I mention I have set as default printing B/W only and have click APPLY it.

Do you think if I changed to PS driver will solve the problem ? Where can I get these HPLJ 4100 printer driver ?

[D_L_P]

I had to read these posts a few times before the light bulb in my head went off too.

BluesGuy -
colorPCL5c.jpg



Check the Grey Compensation box, then set the color mode to B/W.

Also, the HP lj4100 print driver comes with just about every windows OS. Add printer, use the existing port, and instead of clicking "have disk" browse to hp and look for the pcl driver.

[teckat]

Remember> some programs treat graphics as color whether it is B&W or Color, causing the copier to reproduce the B&W graphic with a four color process.

Result is a count for= Full Color

[Blues Guy]

Good days to you guys,

At last problem solved.....re install back the Canon iRC printer driver. Sound funny but finally solved.

[teckat]

St Patty.jpg
Case Closed.JPG