Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5

Thread: canon c1+

  1. #1
    Technician
    Join Date
    Jun 2010
    Posts
    44
    Rep Power
    29

    canon c1+

    our canon c1+ is unable to print the p-report - technician was in yesterday to do service and found it won't print this report - simply goes to alarm mode - puzzled technician -

  2. #2
    Service Manager 10,000+ Posts
    canon c1+

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by cedarstreet View Post
    our canon c1+ is unable to print the p-report - technician was in yesterday to do service and found it won't print this report - simply goes to alarm mode - puzzled technician -
    When selecting P-Print in Service Mode, the P-Print will flash “Active” but no output is generated.
    Also, in the upper right of the LCD, the <SERVICE> icon will change to <ALARM>. At this point, if the control panel soft switch is cycled, the error light will flash, and the default screen will be displayed. On the bottom of the screen will now indicate “Report” and “LTR load paper.”

    to see LOAD PAPER Message/
    u must have at least Firmware ver.66.04


    Solution :
    The following conditions must be set in order to generate a P-Print:

    1) The paper source must contain one of these paper sizes, LTR, LTR-R, LGL or 11x17.

    2) Paper Type should be set to Plain.

    3) The Cassette in which the report will print from must be enabled "ON" under Drawer Eligibility.
    To view or change this setting > Additional Function > Common Settings >
    Drawer Eligibility for APS/ADS > < OTHER > < enable the cassette ON >




    power off printer/ then power on printer

    then>
    1) Go into Service Mode
    2) Hit Function
    3) Hit Misc-P
    4) Hit P-Print
    5) Hit OK
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Technician
    Join Date
    Jun 2010
    Posts
    44
    Rep Power
    29
    thanks for help - found that settings for the letter cassette was set for heavy thus no print - reset to plain and it printed fine - so how much to train me to work on my c1+ - canon service in our rural area consists of a guy reading a manual on site - I am an old service tech - will you train me?

  4. #4
    Service Manager 10,000+ Posts
    canon c1+

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by cedarstreet View Post
    thanks for help - found that settings for the letter cassette was set for heavy thus no print - reset to plain and it printed fine - so how much to train me to work on my c1+ - canon service in our rural area consists of a guy reading a manual on site - I am an old service tech - will you train me?



    Pay for my plane fare from USA/ will also need logging-food

    Money-handout.jpg

    best bet= get a imagePress C1 Service Manual/
    do a self learn on your own time
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  5. #5
    teacher-guide-expert-guru 2,500+ Posts
    canon c1+

    zoraldinho's Avatar
    Join Date
    Mar 2008
    Location
    SVN
    Posts
    4,943
    Rep Power
    106
    Quote Originally Posted by teckat View Post

    Pay for my plane fare from USA/ will also need logging-food

    Money-handout.jpg

    best bet= get a imagePress C1 Service Manual/
    do a self learn on your own time
    fair enough

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here