hi,does anyone know if you can do reg clear on this mc like you can on IRC4080 im sure i saw it on here but im not 100% .if you can let me know on what version system software.thankyou.
hi,does anyone know if you can do reg clear on this mc like you can on IRC4080 im sure i saw it on here but im not 100% .if you can let me know on what version system software.thankyou.
reg clear?
I am unclear on what you are asking, what is a reg clear? Are you referring to a DC-Con clear to try to fix a color registration issue?
if you are refering to clear all data setting that the 4080 has the answer is no. That option was not avaiable on the 3200/3220 series machines.
Accidents don't just happen. They must be carelessly planned.
hi its for blurred copies on IRC3200/3220,on a 4080 you can go into service mode 2 clear-reg clear which resets the lasers,i just thought i saw it on here but not sure because ive hever seen it on 3200 but it would be very handy to now.thankyou.
for blurred copies it could be the lasers, but reseting them by hand is always best.
Accidents don't just happen. They must be carelessly planned.
for the 5180 series>
there is a tilt correction in Level 2- COPIER>FUNCTION>LASER LD-ADJ-Y/M/C for
horizontal scanning direction only
best bet is to stay out of Level 2
for blurred images> follow a procedure>
read below>
TP03-1.pdf
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
There was a new function added to 4080 service mode , which lets you clear the registration data only, without clearing the whole DC-CON.
It takes a couple of tries sometimes.
It does not aply to 3200
why would u clear Reg Data, and not follow a procedure.
Clear/ is a typical Canon Band-aid approach
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
on irc 3200 color displacement are usually caused by an old drum unit. try to see if your drums are still good. or else color displacement will come back over again.
there is no glory without sacrifice
Bookmarks