I have problem copier iR3320i error code E355 please help me. I tries clear error in service mode turn off/on but this error occur.
I have problem copier iR3320i error code E355 please help me. I tries clear error in service mode turn off/on but this error occur.
You're playing with your counter pcb. sure e355 will occours.
PDL Boot ROM Converter / Duplication - Disclaimer
pls educate me that how to reset the IR 3300 counter.
i guess one shouldnt buy refurb copiers in the 3rd world - one never knows what the counts will be - oddly enough as a tech i would never imagine resetting the main counter
Thanks Canuck.
Unethical. It's just unethical to reset counters. You deserve your counter related errors if you are trying to bilk the cutomer into thinking the machine is new, or only slightly used.
How would you like to buy a copier with 2.5 million copies, that the counter says 125K? I know that I would be PISSED!
Well,its your own fault for giving these foreigners the information on how to reset the counters!
Somebody asks on their one and only post and then some moron comes along and posts it.
Paul@justmanuals.com
I also can not think of a legitimate reason for resetting the counter, those that are most likely wish to commit fraud.
I don't think it would work with newer iR's anyway as they are designed to avoid exactly that situation. The counter is duplicated between the counter pcb and the main controller. If you swap just the counter pcb it copies the count info to the new board, and vice verse if you swap the main board it gets copied from the counter pcb, if you swap both boards you get an error.
Hello , resetting the counter can be done d , using the SST software and a special file that we re-write the counter board data.That special file is also a *.upd file that run compatible on SST.Just throw into the machine it`s under SYSTEM v43.01.
Thanks
Bookmarks