Page 5 of 7 FirstFirst 1234567 LastLast
Results 41 to 50 of 65
  1. #41
    Field Supervisor 1,000+ Posts


    charm5496's Avatar
    Join Date
    Apr 2008
    Posts
    2,209
    Post Thanks / Like
    Rep Power
    40
    as far as I know there is nothing out there that can accomplish this without messing up the machine. I would think your machines would have an E355 error codes or something similar to that in the error history.

    Accidents don't just happen. They must be carelessly planned.

  2. #42
    Service Manager 250+ Posts


    V-P's Avatar
    Join Date
    Apr 2011
    Location
    East Europe Mostly
    Posts
    471
    Post Thanks / Like
    Rep Power
    13
    I am getting a used iR105 + Fin. with a meter below 500 K. Which seems a bit unusual. I am very suspicious about the meter on this machine.
    Just wanted to know if there is a way of knowing before buying.


  3. #43
    Service Manager 250+ Posts
    Join Date
    Mar 2010
    Location
    Enfield, Ct
    Posts
    297
    Post Thanks / Like
    Rep Power
    12
    Yea
    the condition of the machine
    if it sounds too good to be true it is
    I have seen a few 105's with low copy counts

    as for how to tell you need to be able to understand the file system and some of the inf files
    and if they have been edited properply then you cannot tell

    Been there done that

    they have been doing it overseas for about 6 years now
    I know as I have seen them do it machines exported to Korea and such

    watched them do it talked with them about it
    they thought they were the only ones that could do it
    i showed them how I did it they didn't believe that an American could figure it out
    as we are not savvy enough

    Enough about this topic
    ITS ILLEGAL AND IMMORAL AND UNETHICAL
    All the things I am not


  4. #44
    Junior Member
    Join Date
    May 2011
    Posts
    2
    Post Thanks / Like
    Rep Power
    0

    Counter reset for canon rental machines

    I know it may seem wrong but resetting counters prior to rental is fine,makes it far easier to bill customer.....

    If anyone wants to know how then contact me....only for rentals


  5. #45
    Junior Member
    Join Date
    May 2011
    Location
    SURATGARH,RAJASTHAN
    Posts
    1
    Post Thanks / Like
    Rep Power
    0

    Thumbs down canin ir 3300 counter reset

    change counter & serial board in a new machine & ten replace & use in old machine ur counter change in new machine


  6. #46
    Junior Member
    Join Date
    Mar 2012
    Location
    Jakarta
    Posts
    5
    Post Thanks / Like
    Rep Power
    0

    Lightbulb Re: E355-00003 iR3320i

    Quote Originally Posted by wachira View Post
    I have problem copier iR3320i error code E355 please help me. I tries clear error in service mode turn off/on but this error occur.
    This eror Counter n serial incompatible


  7. #47
    Field Supervisor 5,000+ Posts


    JustManuals.com's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    10,478
    Post Thanks / Like
    Rep Power
    133

    Thumbs down Re: How to Reset Copy Counter in IR Series ?

    3rd world.........

    When you need a manual and you need it NOW !

    http://www.justmanuals.com
    Instant downloads

  8. #48
    Junior Member
    Join Date
    Mar 2012
    Location
    Jakarta
    Posts
    5
    Post Thanks / Like
    Rep Power
    0

    Re: how

    Quote Originally Posted by abdoubf View Post
    i would like to reset the copy counter in ir 3045/3245/5570/5065
    yes please tell me how about to reset counter in IR 5570/5065.. Please contact me or send me to ian_boysahm@yahoo.co.id. Thanks..


  9. #49
    Service Manager 100+ Posts


    jcontractor's Avatar
    Join Date
    Aug 2010
    Location
    Aguadilla, PR
    Posts
    244
    Post Thanks / Like
    Rep Power
    11

    Re: How to Reset Copy Counter in IR Series ?

    Quote Originally Posted by zombiee View Post
    Hi,

    I am looking for a solution which would allow me to reset the copy counter in IR 3300 / IR 5000 / IR 6000 Machines.

    Does any one have any idea how to do this ?

    Thanking You,

    -Zombiee
    The best way is buying a new "0" copies machine.
    Total counter is important to get the proper maintenance for machine.
    Well the machine is your boss property.

    Is that helpful for a machine?


  10. #50
    Field Supervisor 5,000+ Posts


    JustManuals.com's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    10,478
    Post Thanks / Like
    Rep Power
    133

    Thumbs down Re: how

    Quote Originally Posted by rasya.ssd View Post
    yes please tell me how about to reset counter in IR 5570/5065.. Please contact me or send me to ian_boysahm@yahoo.co.id. Thanks..
    If we told you, we'd have to kill you too.

    When you need a manual and you need it NOW !

    http://www.justmanuals.com
    Instant downloads

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here