as far as I know there is nothing out there that can accomplish this without messing up the machine. I would think your machines would have an E355 error codes or something similar to that in the error history.
as far as I know there is nothing out there that can accomplish this without messing up the machine. I would think your machines would have an E355 error codes or something similar to that in the error history.
Accidents don't just happen. They must be carelessly planned.
I am getting a used iR105 + Fin. with a meter below 500 K. Which seems a bit unusual. I am very suspicious about the meter on this machine.
Just wanted to know if there is a way of knowing before buying.
Yea
the condition of the machine
if it sounds too good to be true it is
I have seen a few 105's with low copy counts
as for how to tell you need to be able to understand the file system and some of the inf files
and if they have been edited properply then you cannot tell
Been there done that
they have been doing it overseas for about 6 years now
I know as I have seen them do it machines exported to Korea and such
watched them do it talked with them about it
they thought they were the only ones that could do it
i showed them how I did it they didn't believe that an American could figure it out
as we are not savvy enough
Enough about this topic
ITS ILLEGAL AND IMMORAL AND UNETHICAL
All the things I am not
I know it may seem wrong but resetting counters prior to rental is fine,makes it far easier to bill customer.....
If anyone wants to know how then contact me....only for rentals
change counter & serial board in a new machine & ten replace & use in old machine ur counter change in new machine
3rd world.........
yes please tell me how about to reset counter in IR 5570/5065.. Please contact me or send me to ian_boysahm@yahoo.co.id. Thanks..
Bookmarks