I want to deliver 2 Gb DDR SDRAM on iR 5570, what council will give????
I want to deliver 2 Gb DDR SDRAM on iR 5570, what council will give????
First of all what is the max memory the board can handle? What are looking to accomplish? If it's Ripping time what is the application that is the challenge? Really more memory is a good thing. However B/W products dont need as much as colour. The only reason I see to mess with base memory is to try and resolve the above notes. If it Ripping time test another driver.
It won't hurt anything to try more memory. It will not boot up if it doesn't like the memory. Or it might only recognize 1GB.
512MB is standard for that model, and there are 2 slots so I would assume it can't address more than 1GB. But it won't lock you out with an error if that's what you want to know.
I would stick with 1Gb if that's the max. Even if it doesn't address the extra Gb I would stick with the factory on this one.
Thanks For All
rubiks-cube.gif
keep it simple'
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks