Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Junior Member
    Join Date
    Feb 2011
    Posts
    7
    Rep Power
    0

    c3220 rdf jaming on low number of pages

    I'm having an issue with the rdf pulling multiple pages threw when you copying a small number. I can run 20 pages with no problem but when i try and run 4 it pulls 2 threw any ideas??

  2. #2
    teacher-guide-expert-guru 2,500+ Posts
    c3220 rdf jaming on low number of pages

    zoraldinho's Avatar
    Join Date
    Mar 2008
    Location
    SVN
    Posts
    4,681
    Rep Power
    89
    Are you a tech?Do you check how many copies do you have with existing separation rollers on rdf?

    ScreenShot001.jpg
    Practice makes perfect
    If it ain't broke, don't fix it
    A picture is worth a thousand words
    If you want something done right, you have to do it yourself


  3. #3
    Junior Member
    Join Date
    Feb 2011
    Posts
    7
    Rep Power
    0
    according to the counter in the service menu there are only 1320 on the feeder.

  4. #4
    Service Manager 10,000+ Posts
    c3220 rdf jaming on low number of pages

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,863
    Rep Power
    229
    Quote Originally Posted by persichini View Post
    I'm having an issue with the rdf pulling multiple pages threw when you copying a small number. I can run 20 pages with no problem but when i try and run 4 it pulls 2 threw any ideas??

    Also Replace your Separation Pad
    DF1.JPG
    DF.JPG
    DF2.JPG
    DF3.JPG
    DF4.JPG

    DO NOT FOR GET TO PUT BACK THOSE DIP SWITCHES
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  5. #5
    Lead Service Technician 1,000+ Posts mrfixit51's Avatar
    Join Date
    Oct 2008
    Location
    Davenport, Iowa
    Posts
    1,973
    Rep Power
    43
    Get used to doing this procedure fairly often,,, the separation pad in this feeder never makes life in the counters. It is an ill conceived design, and to insure continued customer satisfaction, carry the pads with you and replace at the first hint of multifeeding...

  6. #6
    Tech Specialist 1,000+ Posts Canuck's Avatar
    Join Date
    Nov 2007
    Location
    Southwestern Ontario
    Posts
    1,560
    Rep Power
    46
    Make sure you transfer the little rollers from the old separation assy to the new one...rollers don't come with it.

  7. #7
    Junior Member
    Join Date
    Feb 2011
    Posts
    7
    Rep Power
    0
    I'm waiting on a new pad to arrive... getting anything in the mail last week was a nightmare with our texas freak snow/ice storm. I went ahead and took the seperation pad out and cleaned it really good streached the spring and replaced it... work fine on friday but this morning first copy sucked 2 pages threw... i guess i'll just have to wait.

  8. #8
    Service Manager 10,000+ Posts
    c3220 rdf jaming on low number of pages

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,863
    Rep Power
    229
    Remember to clean the large rubber feed roller/ do not use alcohol on it

    If you have never taken out that roller pick-up unit---it can be a little tricky the first time

    with the sep pad unit out>
    Removing the separation roller
    Removal of the separation pad assembly)
    1) Lower the separation roller holder [1]
    and pull out the stopper [2].
    DF.JPG
    DF1.JPG
    DF2.JPG
    DF3.JPG
    DF4.JPG
    DF5.JPG
    DF6.JPG
    DF7.JPG
    DF8.JPG
    If you perform this procedure the dip switches are set as above, then re-install the sep pad unit/ & re-set dips back in position -stated in pad removal above
    Last edited by teckat; 02-07-2011 at 04:50 PM.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  9. #9
    Tech Specialist 1,000+ Posts Canuck's Avatar
    Join Date
    Nov 2007
    Location
    Southwestern Ontario
    Posts
    1,560
    Rep Power
    46
    Shittiest doc feeder ever made

  10. #10
    Service Manager 1,000+ Posts vigour's Avatar
    Join Date
    Aug 2010
    Posts
    1,006
    Rep Power
    33
    If your spring stretching skills fail, there is a modified spring available.fx

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here