I'm having an issue with the rdf pulling multiple pages threw when you copying a small number. I can run 20 pages with no problem but when i try and run 4 it pulls 2 threw any ideas??
Thanks: 0
Likes: 0
Dislikes: 0
I'm having an issue with the rdf pulling multiple pages threw when you copying a small number. I can run 20 pages with no problem but when i try and run 4 it pulls 2 threw any ideas??
Are you a tech?Do you check how many copies do you have with existing separation rollers on rdf?
ScreenShot001.jpg
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
according to the counter in the service menu there are only 1320 on the feeder.
Get used to doing this procedure fairly often,,, the separation pad in this feeder never makes life in the counters. It is an ill conceived design, and to insure continued customer satisfaction, carry the pads with you and replace at the first hint of multifeeding...
Make sure you transfer the little rollers from the old separation assy to the new one...rollers don't come with it.
I'm waiting on a new pad to arrive... getting anything in the mail last week was a nightmare with our texas freak snow/ice storm. I went ahead and took the seperation pad out and cleaned it really good streached the spring and replaced it... work fine on friday but this morning first copy sucked 2 pages threw... i guess i'll just have to wait.
Remember to clean the large rubber feed roller/ do not use alcohol on it
If you have never taken out that roller pick-up unit---it can be a little tricky the first time
with the sep pad unit out>
Removing the separation roller
Removal of the separation pad assembly)
1) Lower the separation roller holder [1]
and pull out the stopper [2].
DF.JPG
DF1.JPG
DF2.JPG
DF3.JPG
DF4.JPG
DF5.JPG
DF6.JPG
DF7.JPG
DF8.JPG
If you perform this procedure the dip switches are set as above, then re-install the sep pad unit/ & re-set dips back in position -stated in pad removal above
Last edited by teckat; 02-07-2011 at 04:50 PM.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Shittiest doc feeder ever made
If your spring stretching skills fail, there is a modified spring available.fx
Reply With Quote
Originally Posted by persichini
Bookmarks