Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 31
  1. #11
    silverink
    Guest

    Short-out , same problem

    Quote Originally Posted by teckat View Post

    you do not need to re-load firmware/

    short pin method could jump u out of that download screen issue
    report back if issue is not fixed
    Hello

    I have an Canon IR 1018 and displays "DOWNLOAD STANDBY " when i power it on .
    I have shorted out the 2 pins on the JP141 jumper an i have the same problem "DOWNLOAD STANDBY " .

    At one startup it did work , and the printer started fine . After shutdown , the same problem . I pulled out the DDR card , and putted back , and the same issue.

    Any suggestions ??

    Thank in advance

  2. #12
    betatech
    Guest

    same problem

    Hello,

    I'm a tech of a lab located in an happy island


    We got two iR1018, one is working good, the other asks for firmware.
    We checked the cr2032, is 3v+ - shorted all the JPs with no change. While shorting JP141 just skips the bad firmware and asks for flash quickly.

    We got SST4.33 but we can't find anywhere the flash file (should it be 16m?), we think we can download the flash from the good ir1018, but we can't configure correctly the usb device in WinXP.

    Anybody experienced this before?

    Thanks a lot in advance,

    We are available for answering about other electronics repair (lcd, tv, pc/nb mobos, etc)

    We know this is our first post, but we just found this forum by googling and it seems very good so we just registered. We we could help, we will.


    -added infos:
    ddr is good
    reads usb thumb drive (fat32, 1gb) --> could we load firmware from here?
    Last edited by betatech; 03-03-2011 at 03:37 PM. Reason: more info

  3. #13
    Service Manager 10,000+ Posts
    canon ir 1018 download standby

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    I believe these models use same compatible Firmware>
    iR1018, iR1022, iR1022A, iR1022F, iR1022i, iR1022iF, iR1023, iR1023iF, iR1023N = Flash ROM 16MB type

    (1) If upgrading from an older version to v60.03 (or later), the BOOT area is increased.
    At the same time, the SYSTEM writing start address (FLASH-ROM) is changed.
    The SYSTEM writing start address is included in the BOOT v60.03 and later, so after BOOT has completed
    downloading, turn OFF and ON the power so that the new SYSTEM writing start address is reflected.


    Upgrade procedures

    <Without options>
    1. Overwrite BOOT.
    2. Check that "OK" appears on the touch panel display. Then, turn OFF and ON the power manually.
    (Download mode starts.)
    3. Overwrite SYSTEM.

    <With OPT16MB>

    1. Overwrite BOOT.
    2. Check that "OK" appears on the touch panel display. Then, turn OFF and ON the power manually.
    (Download mode starts.)
    3. Overwrite OPT16.
    4. Check that "OK" appears on the touch panel display. Then, turn OFF and ON the power manually.
    (Download mode starts.)
    5. Overwrite SYSTEM.

    <With OPT32MB>
    1. Overwrite BOOT.
    2. Check that "OK" appears on the touch panel display. Then, turn off and on the power manually.
    (Download mode starts.)
    3. Overwrite OPT32
    4. Check that "OK" appears on the touch panel display. Then, turn off and on the power manually.
    (Download mode starts.)
    5. Overwrite SYSTEM.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  4. #14
    betatech
    Guest
    Thank you very much for your detailed instructions. I'm having troubles in finding any of that firmwares. Also, I can't find usb drivers (I think they are in the firmware disc)

    Does anybody know where can I download the firmware?

  5. #15
    Service Manager 10,000+ Posts
    canon ir 1018 download standby

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by betatech View Post
    Thank you very much for your detailed instructions. I'm having troubles in finding any of that firmwares. Also, I can't find usb drivers (I think they are in the firmware disc)

    Does anybody know where can I download the firmware?


    what MODEL firmware ver is on SST
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #16
    lynx_13
    Guest

    Post Re: canon ir 1018 download standby

    good day!
    i have read your query. i am also experiencing the same problem with my copier Canon iR1022.
    have you found a solution to that problem? can you help me how to fix my copier?
    thanks.

    lynx

  7. #17
    Service Manager 10,000+ Posts
    canon ir 1018 download standby

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: canon ir 1018 download standby

    you can not put your personal selling links in your post/ read the rules/

    please remove them

    you have been tagged
    Last edited by Aneurysm; 10-20-2012 at 06:20 PM. Reason: Edited links in quoted text
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  8. #18
    Trusted Tech 50+ Posts
    Join Date
    Jan 2009
    Location
    Moscow
    Posts
    71
    Rep Power
    31

    Re: canon ir 1018 download standby

    Hi, All

    It seems that there are a lot of similar problems with this ruler...

    At me such:

    I turn on the device - on the display a dark blue background, on it the line of loading is hardly visible; it reaches the end and all...
    buttons of the control panel don't react, it is impossible to enter into a mode of loading (thus at inclusion rotations of knots) are audible;
    wanted to enter vrezhy loadings through "2 & TURN ON" - didn't help;
    if to short-cut JP141, the device NOT TURNS ON ABSOLUTELY!!!

    MNCON died?
    Hardworking people are not present. Simply many it is boring to idle.

  9. #19
    amg76
    Guest

    Re: canon ir 1018 download standby

    Exactly my problem. Unfortunately the links were removed I can't find the firmware v60.03 for IRC 1022A anywhere

  10. #20
    Xliado
    Guest

    Re: canon ir 1018 download standby

    Dear M friend
    I have same Problem but with IR1024iF, I mean the "Download Standby"..
    Could youi please explain me how to upgrade firmware
    ...

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here