Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 9 of 9
  1. #1
    Trusted Tech 50+ Posts imagewalker's Avatar
    Join Date
    Jun 2010
    Posts
    90
    Rep Power
    0

    Cool E001-001 Canon iR5570 poor fusing on one edge

    This machine is doing some odd things,started off by doing no fusing to the rear of the machine about 2 inches from the rear edge.Has the odd E001-001 changed the holder unit or heating element but still doing the same thing. Im used to lamps not this type of element thing. still confused on how it can fuse everywhere but not on one edge. That's why i changed the holder unit element thingy. But no change! Any suggestions? is it really the thermistor? or is the shutter in the wrong position.

    Thanks
    imagewalker
    Last edited by imagewalker; 02-15-2011 at 04:36 AM.

  2. #2
    Senior Tech 250+ Posts
    Join Date
    Jun 2010
    Location
    folsom
    Posts
    495
    Rep Power
    25
    try replacing the lower roller and bearings!

  3. #3
    Trusted Tech 50+ Posts imagewalker's Avatar
    Join Date
    Jun 2010
    Posts
    90
    Rep Power
    0
    Hey ill try that i did see a few wrinkled pages. Thought it might be the fusing temperature but ya it could be the lower roller is out of round........

  4. #4
    Senior Tech 250+ Posts
    Join Date
    Jun 2010
    Location
    folsom
    Posts
    495
    Rep Power
    25
    bearings also! the bearings freeze up and wear out the shaft ends where the bearings sit! the lower roller bearings will also cause jamming problems! are you getting shutter errors? make sure inside the ufr is clean, it builds up metal dust which can bind up the shutter!

  5. #5
    Service Manager 10,000+ Posts
    E001-001 Canon  iR5570 poor fusing on one edge

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,024
    Rep Power
    234
    E001
    Check to make sure the Fuser Shutter is operating properly & not sticking / hanging up in the Upper Fuser roller

    Check bearings and check the nip
    Do Not Reuse the Thrust Fixing Roller Retainer
    Do not reuse the Thrust Fixing Roller Retainer once it has been removed from the roller.
    The plastic may become deformed when removed from the roller resulting in poor gripping force. Reusing the retainer
    may cause damage to the 52T gear and fixing roller.
    When replacing the roller, replace the retainer at the same time.
    FC6-3501-020
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #6
    Trusted Tech 50+ Posts imagewalker's Avatar
    Join Date
    Jun 2010
    Posts
    90
    Rep Power
    0
    Man, i just thought the NP6050, NP6551, IR5000, iR5020, iR5070 were like the best thing ever on the market the fusers where so easy to rebuild then they had to change it to this messed up element thing reminds me of the Canon iR200 fuser (jus kill me now ) Guess ill just have to get used to it, thank god i only have a few of these machines out there only bad thing is we have been changing machines to less tech needed Xerox machines HAAAAAA (they have non rebuild units dosent mean the cost is less thou lol)

  7. #7
    Trusted Tech 50+ Posts imagewalker's Avatar
    Join Date
    Jun 2010
    Posts
    90
    Rep Power
    0
    Thanks for the help guys i will try your suggestions this week and ill let you know in the mean time i love my iR5070's lol.....

  8. #8
    Trusted Tech 50+ Posts imagewalker's Avatar
    Join Date
    Jun 2010
    Posts
    90
    Rep Power
    0
    spot on ACSOLUTIONS worked like a charm replaced with new lower bearings and lower roller cleaned everything nice and clean haven't heard from them since been over a week they were calling me every day...lol

  9. #9
    Senior Tech 250+ Posts
    Join Date
    Jun 2010
    Location
    folsom
    Posts
    495
    Rep Power
    25
    Awsome, Glad I could help, hope everything is still ok? 5570 is a great machine once you work on them for a time. Good job

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here