Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Jan 2011
    Posts
    95
    Post Thanks / Like
    Rep Power
    8

    IR5055 Error Code E040-010

    Hello guys,

    Need to know this error code details for this machine. Its not in our manual

    Thanks


  2. #2
    Field Supervisor 5,000+ Posts


    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    12,573
    Post Thanks / Like
    Rep Power
    160
    Quote Originally Posted by vishop View Post
    Hello guys,

    Need to know this error code details for this machine. Its not in our manual

    Thanks

    are u sure that is the correct read out on panel E040 ??

    only seen that code on a CLC for cassette/mf lifter motors
    also may have been for the CLC deck also-


    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Jan 2011
    Posts
    95
    Post Thanks / Like
    Rep Power
    8
    Quote Originally Posted by teckat View Post
    are u sure that is the correct read out on panel E040 ??

    only seen that code on a CLC for cassette/mf lifter motors
    also may have been for the CLC deck also-
    yes teckat, its confirmed code, E040 for IR5055n, thats what my fellow technician told me, its not found in the service manual for IR5055/5075.. Anyway he also doubt that part(lifter motor), and going to check for it...

    Thank you teckat, will give you feedback as to what the outcome is...


  4. #4
    Field Supervisor 1,000+ Posts


    charm5496's Avatar
    Join Date
    Apr 2008
    Posts
    2,209
    Post Thanks / Like
    Rep Power
    40
    I have also seen this error on the IRC-5180 series, but it had to do with the fixing/feeder sensor and switch assembly which does not apply to this model. I can't find anything for this error pertaining to the error you are having.

    Accidents don't just happen. They must be carelessly planned.

  5. #5
    Field Supervisor 5,000+ Posts


    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    12,573
    Post Thanks / Like
    Rep Power
    160
    Quote Originally Posted by vishop View Post
    yes teckat, its confirmed code, E040 for IR5055n, thats what my fellow technician told me, its not found in the service manual for IR5055/5075.. Anyway he also doubt that part(lifter motor), and going to check for it...

    Thank you teckat, will give you feedback as to what the outcome is...
    are u sure it is not an ALARM CODE ?? if so , it would be 04-0001 for deck lifter m

    when did this tech note the code ??
    is the printer up or down ??
    what are the other Error codes shown in log ?
    does printer heat up ?

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #6
    Field Supervisor 5,000+ Posts


    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    12,573
    Post Thanks / Like
    Rep Power
    160
    If it is an Alarm Code 040011

    Alarm is for right deck retry to pick up failure.

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  7. #7
    Trusted Tech 50+ Posts
    Join Date
    Jan 2011
    Posts
    95
    Post Thanks / Like
    Rep Power
    8
    The error code noted on the screen is read as E0004000-01000. Anybody can interpret this and where does this error point to?
    A fellow tech says its read as E040 while another one says its E400.

    Thanks


  8. #8
    Senior Tech 100+ Posts


    Gamut's Avatar
    Join Date
    Jul 2008
    Posts
    175
    Post Thanks / Like
    Rep Power
    14
    Are you sure it's not E004, get him to check fuser then try error clear, and report back.


  9. #9
    Trusted Tech 50+ Posts
    Join Date
    Jan 2011
    Posts
    95
    Post Thanks / Like
    Rep Power
    8
    its not fuser problem.


  10. #10
    Senior Tech 100+ Posts
    Join Date
    Jul 2008
    Posts
    175
    Post Thanks / Like
    Rep Power
    14
    hi,you have a E400 code is it to do with the feeder DADF.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here