The paper has jammed CANON iR6570/5570

[gensys]

Display mess. >> Open the feeder cover (if any originals are left in the original feeding tray, remove them)

But the paper in Feeder (ADF) is not present

[y_us1982]

initialize the feeder sensor. svc mde>feeder>function>init
hope that solve yr prblm....

Display mess. >> Open the feeder cover (if any originals are left in the original feeding tray, remove them)

But the paper in Feeder (ADF) is not present

[zoraldinho]

Display mess. >> Open the feeder cover (if any originals are left in the original feeding tray, remove them)

But the paper in Feeder (ADF) is not present

tell as jam code.

[gensys]

Hi my friends Zorald
E000014-0000

[gensys]

Thaks!!!!!!!!!!! Y_US1982

[zoraldinho]

Hi my friends Zorald
E000014-0000

Sorry friend but you give me an error for fixing motor.

Check in service mode:

COPIER<DISPLAY< JAM

[mrfixit51]

Hi my friends Zorald
E000014-0000

If this is indeed the error, rebuild the fuser assembly. If turning the green knob on the fuser assembly feels erratic, there are flat spots on the rollers, and this can cause the E014's...

[charm5496]

Display mess. >> Open the feeder cover (if any originals are left in the original feeding tray, remove them)

But the paper in Feeder (ADF) is not present

looks like there are two different issues going on for gensys. There E014 error and the ghost jams in the DADF. Curious if he is getting the remove jam after the machine power is cycled OFF/ON for the error code.

[gensys]

Copier<display< jam

code 0045

[teckat]

Copier<display< jam

code 0045

J0045

Level 1 - FEEDER>FUNCTION>SENS-INT in service mode
adjustment will indicate "OK!" if it ends normally.