Thanks: 
Likes: 
Dislikes: Thanks Teckat for your kind help, I'll try and do this with help of IT desk
just wondering wud just resetting the copier to factory default and set up as new wud help & If yes how do I go about it
Many Thanks
Thanks Teckat for your kind help, I'll try and do this with help of IT desk
just wondering wud just resetting the copier to factory default and set up as new wud help & If yes how do I go about it
Many Thanks
************Originally Posted by luckyearl
There is no factory default setting.
Just go under system settings, & check the date & time setup for your area location.
Do u have an external Fiery connected_?
If so_print out a config page to check it's settings,
look for date & time_?
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Just an FYI I had to do this too on a used machine I purchased and it didn't seem to help UNTIL I turned off the machine and restarted it via the physical switch on the machine and rebooted it. Then the password screen went away.
cheers
-david
All Canon copiers need to be rebooted to clear error.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
COPIER>FUNCTION>CLEAR>COUNTER
Just wondering if this cud be used to reset counter, or need some other function for the same
Tx
Are u trained on C2030 ADVANCED SERIES
there is no CLEAR>COUNTER
what counter are u looking to clear ?? a durable part-
COPIER > FUNCTION > CLEAR >CNT-DCON
Clear of DC Controller service counter
Lv.1 Details To clear the service counter counted by the DC Controller PCB.
Use case= When clearing the service counter counted by the DC Controller PCB
Adj/set/operate method = Select the item, and then press OK key.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Reply With Quote
Bookmarks